mkibbe
-
Posts
4 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by mkibbe
-
-
I just did a check with a multimeter while it was running,14.2 to 14.6 running,then i slowly turned the bars just a enough to apply pressure and my voltage dropped to 12.7 volts,does anyone know the specs that the power steering uses voltage wise.......but as i said above if i keep it revved it won't stall....
-
-
My 2014 750 king quad stalls sometimes when I touch or turn the handlebars,the problem has gotten worse,my machine has 475 miles and is only trail ridden,I have a new factory battery and i have 14.2 volts when the quad is running and 13.3 on the battery when not running,also using a multimeter there is no change in volts when turning the bars until it does stall,If I pull the 40 amp power steering fuse it will not stall.......I've been told its the ECU,Hate to buy one if thats not the problem,but its kinda leaning towards that,,,,,need some opinions.
2014 Suzuki King Quad 750 irs Power Steering
in Suzuki ATV Forum
Posted
Yes I found my problem with the thanks of a good knowledgeable friend all you need to do is unplug this ground under the seat,for some reason with this plugged in its grounding out the system.....