Quantcast
Jump to content


Paul Hannan

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by Paul Hannan

  1. Hello, I hope every one had a great Christmas! Just wondering I noticed the spanner light with the number (2) beside it has appeared on the speedometer screen. Any ideas what this telling me? cheers
  2. Hey just after some advice. I purchased the above mention bike back in mid May. I had the Occasional issue with starting the bike. When trying to start the bike It would make a Clicking noise when the start button was pushed. So I used the pull start all ok. I checked the battery and the starter solorid / relay and found the terminial had corrosion on them. I clean them up and have no issues since. However last night the issue came back with clicking when pushing the start buttoned he time. Any ideas? Relay or starter motor?
  3. Sorry for the delay. It’s all fixed now. I purchased a second hand main shaft and replaced it my self. Easy job apart from the seized castlated nut on the left hand side. Ended up having to grind it off! Flashed diff oil several times. All good. Bikes for sell now since been replaced with Honda foreman 500!
  4. No drain the oil no steel seen. Made a start yesterday pull the shaft out. Hopefully by the weekend I will know more. I’ve tracked down a second hand one. Hopefully that all that is buggered. Any idea on how to flash all the old oil out of the diff. I’m not really wanting to strip it down? Cheers
  5. Hey, Looking for some advice regarding rear diff issue. I have lost all drive power to the rear wheels from the diff. I have drained the diff oil and have not really found anything to scary apart from the colour of the oil.... Ive jacked the bike up. Then I took the side cover off the transfer case to confirm drive shaft is all ok. And spins when put in gear etc. Then check the rear diff oil filler where you can see the crown wheel (final gear) that was spinning all ok. My guess the spline how stripped on something either final drive or the main axle. Main question is how do I tell if the final drive splines are stripped? Also during the process I managed to bugger the diff oil filler bolt plug thingee! Any ideas where I can get one? I’m in New Zealand if that helps. cheers
×
×
  • Create New...