I am at my wits end. I cannot get any spark at the plug. I replaced everything. New loom, CDI, Ignition Coil, Regulator, Stator.
To attempt to eliminate kill switch issues, the only connections I am working with are the Stator to CDI, CDI to Coil., Starter solinoid to battery. The regulator is not connected, nor are any switches or other plugs. I have even removed the kill wire from the CDI connector. So I have the bare minimum of a ignition circuit. Yes, I do have a battery connected and earthed to the chassis.
I am getting around 20v AC out of the stator on the red/black, and 0.5v AC on the blue/white (trigger). Same voltages at the CDI connector (input)
I am only getting around 0.5v on the yellow/black out of the CDI to the coil.
I am getting around 0.5v AC at the sparkplug.
Any suggestions?
Why no spark in chinese 125cc ATV?
in General ATV Discussion
Posted
To attempt to eliminate kill switch issues, the only connections I am working with are the Stator to CDI, CDI to Coil., Starter solinoid to battery. The regulator is not connected, nor are any switches or other plugs. I have even removed the kill wire from the CDI connector. So I have the bare minimum of a ignition circuit. Yes, I do have a battery connected and earthed to the chassis.
I am getting around 20v AC out of the stator on the red/black, and 0.5v AC on the blue/white (trigger). Same voltages at the CDI connector (input)
I am only getting around 0.5v on the yellow/black out of the CDI to the coil.
I am getting around 0.5v AC at the sparkplug.
Any suggestions?