Alphamonk

Go to Partzilla and look up the part number for each. If the part numbers match, you're good to go.

Thanks. That us a big help.

Yep. Sold it.

You may be right. It was the original Mikuna carb. The Chinese knock off wouldn't allow the engine to start at all. I took that one apart and found the hole in the throttle body plugged up with what looked like metal shavings. Got her running good now.

Okay guys, this is a nutty situation. I have been trying to get my Bayou to idle and accelerate properly. I found the easiest way to adjust the mixture screw on the bottom of the carb is to loosen it slightly and twist the carb to access the screw on the bottom of the carb. Not having much luck, but today one time I forgot to straiten the carb back to the correct position and the bike ran great! With the carb sitting at a 45 degree angle. Does this mean maybe the float is set too low and not allowing enough fuel into the carb? I feel like this is trying to point me in the right direction. Lol Any suggestions?

Hoping someone on here. I have a 2008 650 H1 that I need upper engine parts for. Piston sleeve, head with valves cams and all. Can anyone point me to a used equipment dealer. Also, does anyone here know what other years my engine is compatible with?