Jaskafin
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by Jaskafin
-
-
31 minutes ago, Mech said:
Tell me in the mean time.. when you say "When i put power on it takes couple seconds and difflock light starts to burn...", do you mean when you turn the key on, when you use the throttle, or when you start pushing it along a bit, using a lot of power ?
And, do you have a manual for the vehicle you have, and is it for downloadable.. Best if we are both looking at the same manual..
Yes. When i turn key to on position, it takes couple seconds and that difflock light starts to burn. 2wd is selected on controls.
No manual came when i bought it. I have tried to find manual or wiringdiags but havent found yet
Just now, Jaskafin said: -
5 hours ago, Mech said:
There's a 2014 manual here...
https://www.manualslib.com/h/hisun+400xl.html
You should follow their testing and diagnostic process.
UTV has different wiring than ATV.
-
5 hours ago, Mech said:
Is this meant to have an auto engage diff lock does it ? If it detects slip it engages ? Do you have a service manual ?
I'd check the diff is working.. getting drive to the ground.. I'd jack one side of the bike at a time, put it in four wheel drive, and try turning the raised wheel.
If the diff and front drive is working then I'd test the diff lock solenoid is getting power to it, and that it has a good earth, and I'd check the wheel rotation measuring devices if it has any.
Thanks mate for answering. Hisun has servomotor controlled on front axle. 2 buttons on handlebar that controls thst servomotor. Fron 2wd to 4wd ja second button is 4wd to Difflock.
4wd and Difflock works like it should be but it burns difflock light even when i have 2wd selected. I took controlwires away from diff but still light burns so the problem is not on servomotor
-
When i put power on it takes couple seconds and difflock light starts to burn but His is 2wd. I opened the front servomotor unit but no help. Fuses are ok, Relays are ok. Power is on limpmode when the difflight burns.. Whatta hell is problem. Will it help if i brake the light from the dash...
Hisun 400XL 2012 difflock light burns all the time
in Hisun ATV Forum
Posted
How i can read the codes