Ejwill

I removed the lifter plate and springs the plates of course are moving freely. The rear tires being jacked up now rotate forward and backward without any restriction , but the emergency shifter still doesn’t shift up or down. It’s like it locked up. Don’t know if it should shift now since the plates no longer seem to be in play.

Thanks to y’all for the help I got a repair manual in the mail today. After looking it over I think I’ll have to go back to school to figure out how to use it. It jumps back and forth from chapter to chapter and doesn’t seem to finish anything but I’m going to give it a try. Thanks again for the help.

The front cover is still off. I’ll try taking apart to release the plates. Once the plates are released should it shift, if they were stuck. Like I said this is all new to me. I have worked in steam, hydro, and nuclear plant maintenance but never engine repair. I don’t have a repair manual yet but it’s on the way. All of you are great trying to help me. I’m 70 years old and you know what they say about old dogs and new tricks. Thanks again.

Can you buy a repair kit for the brush assembly for a gear shift motor for a 2006 Honda rancher 350es? The base plate broke where it is attached by the two screws. Broke right at each screw. All I can find is kits for the starter motor.

Gw, a little more info on my atv it had been running fine when it left my house . My grandsons borrowed it when it came back it wouldn’t crank. It set up for a couple of years , I finally decided to take a look at it . I got it to crank but it would not move. The electronic shifter would not shift at all , so I used the emergency shifter tool to shift to 1st. It sounded like it did shift, but I tried it, but it would not move, it would sound like it shifted into the upper gears and back to neutral. Now when I shifted to the upper gears it locked up and will not return to neutral. Now it will not shift at all. I don’t know if it was really shifting into upper gears or just sounding like it. Anyway it will not move and it will not shift at all. Like I said the tires rotate backwards but not forward. Thanks so much for your help.

With the manual shifter it will not shift at all. Can’t get it back to neutral, it had shifted up a couple of times now I can’t get it to move. I have the clutch housing cover off, the rear is jacked up and the tires move freely backwards but is locked up trying to move them forward.

thanks for your help, I’m an atv repair idiot. I’ve work mechanical maintenance but nothing on atv’s. Thought I’d give it a try but probably should have paid someone. I’ve got a repair manual on the way maybe that’ll help some. Thanks again for any help.

They will move some with flat head screw driver they spring back in place together. Which I’m assuming is ok they are real tight though.

Yes I just took the clutch cover it will not shift manually and I sure not on the electric shifter.

Should the clutch plates be so tight together that they can not be moved side to side? There is no play in them at all, will not move at all.

I need to get a repair manual for my 2006 trx350te honda rancher350 es. Haven’t been able to locate one any ideas. Thanks in advance.

2006 rancher 350 Trx350te will not shift with electric shifter or with the manual emergency shifter. Could something in the electric shifter stop the manual shifter from shifting also? Should I start there? Thanks for any help.

Headlights and taillights will not work, the dash light will not come on. Already checked fuses they are all good. Help please. 2006 Honda rancher 350 es.

Need help please, need repair manual for 2006 Honda 350 ranger es. Thanks for any help.