Drillbit
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by Drillbit
-
-
Thanks Gwbarm and Mech for your input. I also am having a hard time believing these plugs are fouling so quickly even if rich fuel. I did a compression check initially but the motor was cold and got a 125 reading. That seems to be good but I didn't check that when motor hot. This has a Mikuni carb on it and I put a new kit on it. Yes, I've read alot about those aftermarket kits not having the right size jet holes and things but, Damn, I have no way of telling if the hole sizes are correct. I'm almost thinking about putting the old jets and seats back in it. The choke on this is just a manual push/pull knob type. It's not automatic but it sounds that way when I start it. You don't think the intake valve not seating good would cause this do you? Like I said, it runs good.
- 1
-
Hey all,
I need some input on a problem I'm having with my Kodiak 400 that keeps fouling plugs. First off, I've done a lot of work to this thing, most of it all in good fun. Brake work, cv joints, u joints, carb kit, checked valve lash, compression good, changed all fluids, etc... My problem is it keeps fouling plugs very quickly. I can put a new (manual recommended plug) in and it starts right up, runs great, idles great, picks up good. Doesn't stutter at all. I ride it for 1/2 a mile, it cuts off and won't start back up. I let it sit overnight thinking maybe it got to hot. Try to start it the next day, nothing. Put a new plug in, fires right up, runs great for another 1/2 mile or so, dead. The plugs come out and look carbon fouled with dry black soot on them. I don't know if this is a fuel/air mixture problem or a ignition problem. A couple of things that I noticed is I never need to pull the choke out to start it. Also, when it starts it automatically idles high like an automatic choke would do, then it comes back down to a good idle. Also I noticed that the air/fuel mixture needle valve screw does nothing when I adjust it in or out. I can screw it all the way closed and the motor still runs and idles good. Any advice would be greatly appreciated. I'm almost leaning to a ignition breaking down the plugs??
Thanks!
-
Hi all, from Virginia here. This winter I bought a old Atv to tinker with and have really enjoyed it. Thanks for this forum.
1997 Yamaha Kodiak 400 fouling plugs
in Yamaha ATV Forum
Posted
Update. After taking the carb back off and closer inspection I noticed that the throttle plate was opening to much before the main needle jet even moved any. I have attached a picture. The linkage arm that connects the two had so much play in it that one was opening and the other wasn't doing anything. You can see that I have the idle adjustment screw all the way in and it still wouldn't idle and the choke plunger didn't have any affect when trying to start it. Anyway, By putting a carb kit on it does nothing for this linkage problem so I went ahead and bought a new cheap carb. Put it on, works great. The air/fuel screw now works and the choke and idle screw actually does something. This type of thing can be a gremlin to find. Thanks Mech and Gwbarm.