yamaha_man95

[attach]983[/attach]

i know its not that deep in the woods but i figured i would give it a shot (click to enlarge)

there are no place i know of around there but i know there is a track open in troy and off of I-44

well i think that will work thank you so much this helped me alot

I moved and renamed your thread, it will you get better responses

thank u

mikuni

i am going to get a DG pipe on my 1997 yamaha warrior but i dont now what jetting kit i should get i know i need to go about 6 sizes bigger but dont now what brand to get please help

There is a neutral start relay, should be located under the front fender somewhere in some kind of electrical/fuse cluster. As far as I can tell, it is the only relay in the area. There is also a gear position switch that is located on the same side of the motor case as the shifter, it should be right behind it, if it is on the outside of the motor. An electrical tester may come in handy when diagnosing this problem, you use it to tell if the relay is bad, or if you are losing power somewhere else in the curcuit. Good luck.

hes right try that out ^^^^^^^^^^^^^^^^^^^^^^

well im not too familiar with those but it sounds like its the relay to me but im 15 to what do i know hahaha

well i would try to re-jet it either go a few jet sizes up or down