BOBTHEBUILDER
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by BOBTHEBUILDER
-
-
Called a dealer today and he suggested the battery. I asked about the recalls and just said steering and throttle seal and they had been done. I think the ecm has been replace with a
pro jet power commander 111 or 3. Is this the same part or is't this the ecm?
Back to the battery I did put a load tester on it and it came up week and the it tested 12.54.
Thanks for your help I have been out of this sense the day of my tri-z
Dan
you will find it is a defective cdi unit mine was and meny others i talked two had the same problem . see if you can try a friends cdi to check it out .
-
just brought this home today. my son was riding it for a hour or so. he stoped to help me with move things around in the shed. it sat for 15 to 20 min. could not get it started.
put it on a charger for a hour and got it started by playing with the throtle. my son rode it
for a half hour went down a hill it backfired and killed didn't get it started. it seemed to start fine when cold.
thanks for the help
Dan
HELLO YOU WILL FIND THERE IS A RECALL ON THE ECM BOX UNDER THE SEAT . TAKE IT AND THE VIN TO THE DEALER HE SHOULD BE ABLE TO REPLACE FREE FROM SUZUKI .THIS COMPUTER WILL BE FOR A 750 CC BUT WILL WORK PERFECT. I HAD THE SAME PROBLEM LAST SOMER AND SUZUKI REPLACE NO CHARGE . YOU CAN INSTALL IT YOUR SELF JUST BE SHURE YOU UN PLUG THE battery UNTILL NEW ONE IS INSTALLED . GOOD LOCK AND TELL ME HOW YOU MAKE OUT BOBTHEBUILDER
EMAIL [email protected]
Polaris xpress 300 grinding when going into any gear
in Polaris ATV Forum
Posted
Hello is your bike automatic or standerd ? Standerd you need to adjust clutch or replace. Automatic your idle is set to high . Good luck tell me how it go's thanks bob