Rscheeler
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by Rscheeler
-
-
Hey bud I had the same issue not more then a week ago. What mine was is that you have to take the carb off the wheeler. There is a spring inside the carb that came undone in mine. It was for the air intake. After I put the spring back in it worked great. So in a sence take the carb off, you will have to take the throttle cable off as well and there are 4 screw that you take off and under that cover is a rubber boot. the spring is under the rubber boot. Chek this our and see if that is what it is.
1995 Polaris Magnum 425 4x4 will not go into gear.
in Polaris ATV Forum
Posted
I had a similar issue where it would grind really bad when going into gear. I turned my idle down just a bit and actually also took off the belt cover and cleaned the clutch weights and clutch unit. It was pretty dirty. It works great now maybe u could have some luck