Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

10 Good

About Coastie6

  • Rank
    Forum Beginner
  • Birthday 01/01/1930
  1. Got it. The fan cycles so that is a relief did not want to spend the cash on one unless I had to. Ill try to ride it a bunch and see if it comes on. Certainly if the oil temp light comes on Ill know for sure. I just remember the fan coming on a fair amount. The bike only has 437 miles on it and I bought it new. I guess it is possible that the engine is not producing as much heat now that it is semi-broken-in? Thanks!
  2. Been scanning forums on this issue. Noticed recently that the cooling fan has not been cycling on like it once did. My oil temp light is not coming on (it is working in the test mode when you turn the key switch on). The ATV does not get submerged in mud or water. It primarily ride fire roads and our local gravel roads. I do plow with it and gave it a workout this winter. The cooling fan fuse is good, there is nothing in the fan and the blades turn freely by hand. I assume it is either the fan switch or the fan. Can someone describe the procedure for applying 12V directly to the fan to test it. Do you disconnect the blue connector between the fan switch and fan and do it there? If so do you need to connect + and - to the pins in the connector or just +, I am not sure how to do this and do not want to fry the fan if it is good. Any advice on how to test the fan is appreciated.

  • Create New...