AJsLTZ400
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by AJsLTZ400
-
-
I need to put new valves both on intake and exhaust side bc my valve lash clearance was 0. In order to put new Valves in, can I use old shims or do I need new ones? New springs also?
-
My intake valve was really tight. 0 valve lash clearance. I think that's the problem, I'm waiting on the DRZe kit and Ferrera valves then I will replace the old parts. Thanks for the help guys ill give you an update soon
-
Hey guys thanks for all the help, it was the valves. The intake valve lash was at 0. I didn't realize how important the adjustment was the valves. I'll give you guys an update when it fix it. I'm waiting on parts now:wink:
-
do you think it's a fuel problem? motor needs fuel, air and spark ... if it's getting good fuel supply, the carb might be somewhat dirty. seafoam is a good fuel additive and it'll save you tearing the carb apart ...
it seems to be getting fuel, air and spark. the carb was also cleaned out. rejetted and carb cleaner.
-
is the spark strong? have you tried a new plug? don't replace with the plug that's in it, it might be wrong. make sure it is right one for the bike. ngk has a good chart for atv's ...
yeah i got the manufactor recommanded spark plug. it does have spark.
-
I have a 2006 Suzuki ltz400. i bought it off some kid upstate and it ran when i tested it at his house. i brought it back to Long Island then it wouldnt start. it doesnt electric start to be more specific. Itll start if i pop the clutch in first gear but it doesnt idle, it dies. only does this when the motor is cold, when the motor is warmed up, itll idle. so i took it apart the i found that it had a blown headgasket. i replaced that and now it still doesnt start. i checked the timimg and its TDC on the bottom and top. now it cranks very strong and the compression is strong but it still wont turn over. its popped a couple times but it doesnt run. i cant seem to figure it out, i need help please.:mad:
Suzuki LTZ400 - Valve Job Help
in Suzuki ATV Forum
Posted
I did try to adjust them, they were off by a lot and the intake valve keeper broke off which damaged the valve stem. So I got 4 new valves just to be on the safe side. The stock ones aren't as durable I've read. Got kibblewhites
Yeah I suppose so. Just gotta remove the shims and add diff sizes.