Quantcast
Jump to content

Recommended Posts

Posted (edited)

I have a 1996 King Quad 300 LT-F4WDX ATV

I tried to install a carburetor rebuild kit but there were no instructions and I am unable to find them. Anybody know what the "Pilot Screw" is set at? The engine starts but seems to be flooding- very difficult to get the rpms up and engine acts flooded.

I set the screw to 3 turns from closed. It is called the "Pilot Screw" on exploded views of the carb.

It is a Mikuni BST 31 single carb.

Thanks for any help!

Bill Roberts

Edited by HomerBill
  • 4 weeks later...
Posted

Three turns out is a little rich, at least according to the manual. The stock setting is a little less than 3, 2 3/4 or 2 7/8.

Three should not cause serious flooding problems though, I wouldnt think. I would check the choke and make sure you dont have fuel coming down the carb vent lines from the fuel petcock.

Posted

Thx for your advice! After removing the carb a second time and finding fuel in the vent line I put my tail between my legs and hauled the machine to the dealer for repair. While there I bought a polaris 450 sportsman. Seems like a very different machine with the "automatic" CVT transmission.

I sstill like the King Quad- my favorite. But thanks again! Bill in Homer AK

Posted

Thx for your advice! After removing the carb a second time and finding fuel in the vent line I put my tail between my legs and hauled the machine to the dealer for repair. While there I bought a polaris 450 sportsman. Seems like a very different machine with the "automatic" CVT transmission.

I sstill like the King Quad- my favorite. But thanks again! Bill in Homer AK

Posted

A friend of mine has a Sportsman 500, its a really nice machine. Its huge compared to my KQ, but the extra power is probably worth the trade-off in size.

Sounds like your vacuum fuel petcock is bad. You can convert to a manual, you can get them on eBay for $20 or so. You just have to remember to shut the fuel off when you park and turn it back on when you want to ride.

I didnt notice you started this thread in July. I was a little late to the party.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Memphis
      Not sure if in right place but here goes
      My 300 is lacking power only reaching 30mph and struggling uphill everything else seems ok other that this problem cleaned all fuel new filter pan and all new fuel pump and spark plug full oil change is there anything I am missing
      ps It is auto and does noy seem to want to get in another gear 5200 rpm at 30mph
       
      Regards
    • By Gwbarm
      Does anyone have a recommendation of a really Heavy Duty ATV cover. I have bought several and they do keep the water off somewhat, but they are very thin and do not contour with the shape very well and water pools up in the rack louvers. I think i may be looking for a heavy canvas one, if anyone has a recommendation it would be greatly appreciated.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
×
×
  • Create New...