Quantcast
Jump to content


Looking for a Service Manual? Download Now! ×

Need Help

mguidry43

By mguidry43
in General ATV Discussion

 Share

Recommended Posts

mguidry43 Rookie

mguidry43

Posted
Posted

I have a 2005 John Deere Buck 650 4x4 and I'm reading that it's the same engine as the Quest. My bike's solenoid went out about 6 months ago and I just got around to changing it out. When I got it started I noticed there was an oil leak accompanied by a knocking noise. I fixed the oil sensor that was leaking but the knocking noise is still there. When I changed the oil I did notice metal shavings in the oil and on the oil filter. Any idea on what this could be or what I could be looking at to get it fixed? Any help is appreciated.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • JohnnyB
      1988 LT80 Crankcase Full of Oil
      By JohnnyB
      Greetings, 
      Have a 88 LT80 that been sitting for a couple years. Bought a new piston, cylinder and head. Installed these, rolled it over and it quickly locks up.  Took carb apart. It was full of what appears to be 2 cycle oil. Cleaned it, but keeps locking up and 2 cycle oil continues to seap from exhaust port.  When i installed new cylinder, I noticed crankcase was full of oil.  I'm now wondering if that oil is what's getting sucked up into cylinder.  Should there be no oil in crankcase?  If that the case, how is crank and rod lubricated?  Sorry, never worked on a 2 stroke. Thanks!
    • mga
      good stuff or snake oil?
      By mga
      I see quite a few ads for that  Tribotex additive. It's kind of expensive, has anyone used it it their ATV or any other vehicle?
    • cavry
      02 Bayou 300 solenoid connections
      By cavry
      Wiring shows White and Brown to solenoid blades. Then a black wire from starter circuit relay to solenoid. I am confused,  where is that black wire supposed to connect?
      Thanks for any help
      Cavry
    • Slitzer
      Oil change diffrentials/gearbox Outlander 570 2021
      By Slitzer
      How often do you change oil in front/rear diffrentials and gearbox?
    • jatho
      Suzuki King Quad - Head Oil Leak
      By jatho
      Has anyone else had an issue on older king quads where the oil would leak from the top of the head (due to a failed gasket) and drip onto the hot exhaust? Mine got so hot one time it caught fire. Just wondering if this is a common issue, as I've seen the same thing happen on multiple bikes that were the same model. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...