Quantcast
Jump to content

Recommended Posts

Posted

I have a bayou 220 that will not start. Here is so far. Timing is dead on according to marks, carb is getting gas, plug is firing good crisp blue spark, but it will not hit even squirting gas directly in cylinder. motor turns over fine, compression will blow finger off of spark plug hole. have not checked setting on valves yet, but verified they are working. was riding it and it ran great. parked it to eat dinner, went back out and it would crank but no start. getting fuel, and fire and air but wont even cough. any ideas?

Posted

A tight valve adjustment can cause hard starting.

I have seen vehicles parked and not start later. Usually, it has been happening for a while... hard to start in the morning, but once started, will start all day.

If you are squirting gas directly in the cylinder, through the spark plug hole, you might be flooding it.

Might want to try a new plug.

Odd that it has spark, compression (??), and fuel without starting.

 

Oscar

 

Posted

Tried new plug, same thing. checked intake valve setting, it was a little tight, no movement of rocker at tdc. thought what the heck, checked timing again and altho the marks were dead on, it was apparently firing just after tdc on the down stroke. moved timing one tooth and it fired right up. been riding it and start and stop all day. so far so good! thank you for your input tho, I appreciate it. I did find that the tensioner was stuck and not coming all the way out. guess that is what let it jump time a little

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
    • By LashinWheeler
      Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 
       
      Any help would be great,
       
      Thanks!
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
×
×
  • Create New...