Quantcast
Jump to content

Recommended Posts

Posted

Wicked_Front_Blue_5000qty.jpg

Wicked_Back_Blue_5000qty.jpg

ATV Drag Racing Association : Index

Professional Classes

$100.00 Entry

· TOP ALCOHOL

1. Snowmo & Motorcycle Powered

2. “RUN WHATCHA BRUNG”

· TOP FUEL

1. Snowmo & Motorcycle Powered

2. No Power Adders

· Pro Mod

1. 102mm Center to Center

2. Power Adders Permitted

· Super Comp

1. Aftermarket Cylinders

2. Up to +14mm stroke

3. No Power Adders

· Pro Street

1. Cub Cylinders

2. Up to +8mm stroke

3. No Power Adders

· Super Street

1. Stock Cylinders

2. Up to +4mm Stroke

3. No Power Adders

Sportsman Classes

$75.00 Entry

· Super Eliminator

1. 4 Stroke ATV Engine

2. Power Adders Permitted

· Super Sport

1. 4 Stroke ATV Engine

2. No Power Adders

· Pro Stock

1. Single Cylinder 2 Stroke

2. Power Adders Permitted

· Super Stock

1. Single Cylinder 2 Stroke

2. No Power Adders

· True Street

1. Stock Engine & Stock Suspension

2. Bolt on Performance ONLY

3. NO Out of Frame Drag Pipes

4. Factory Style Tires

· Pro Redneck

4X4 No Power Adders

Index & E.T. Classes

$50.00 Entry

· Outlaw *5.90 Index

· Pro Gas *6.40 Index

· Top Gas *6.90 Index

· Super Gas *7.40 Index

· E.T. Class *No Boxes

GRUDGE CLASSES

$50.00

Flagman Start, NO TIMING SYSTEM USED

· STREET FIGHTER

1. Power Adders Permitted

· REAL STREET

2. No Power Adders

*********************************************************

***Fastest Man on Asphalt***

$1,000.00

*All Classes are required to have a minimum of 8 quad entries to receive 1st and 2nd place payouts split in a 70%-30% amount of all entries paid. Any classes that do not have the minimum required entries will be paid on a 1st place winner takes all basis. *All classes are required to have a minimum of 4 quad entries for the particular class to be held. *Any racers that do not have a competitive class offered to them due to requirements may join and vote for additional classes to be added, class additions will be judged on a majority rules basis. *In order for a racer to receive title and prize for the “Fastest Man on Asphalt” must make a full pass with times posted and perform a pass with a lower E.T. than past records set. *The 2008 record to beat for Fastest Man on Asphalt is 5.67 seconds in the 1/8 mile.

WICKED WEEKEND 2007 VIDEO

[ame=http://www.youtube.com/watch?v=nyM5Vi1-Q7k]YouTube - Wicked Weekend 3 - www.Wickedatv.com[/ame]

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By Dsluder
      I am having an issue with a hs500. I bought it broken and have been trying to get it running. It seems to be starving for fuel. If I put my hand over the intake it will crank but will not run for very long because I'm not able to get the correct airflow with my hand. The things I have done so far are. Replaced the fuel pump, fuel filter, mass airflow sensor, idle air adjuster, fuel injector, cleaned the throttle body, replaced the ecu, and still the same issue. I notice the injector does not spray when removed from the head. I dont know if that is common. 
       
      I am out of ideas on what to do next. I have removed the fuel line from the injector and it is getting plenty of fuel. If anyone has an idea on what could possibly be the issue I would be happy to try anything at this point.
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By HeWasRidinDirty
      I rebuilt the carb on said machine. When I hook up the auxiliary gas tank it runs fine and everything is cool. When I put the fuel tank on and hooked up the lines, it completely flooded the cylinder and even about an inch of fuel in the air box. I'm pretty sure that it comes from the little hose on the petcock and hooks to the top of the carb. WTH is that even for? I mean the thing runs fine on the auxiliary tank, so idk And on the petcock when it's in the "on" position, I get no fuel. The petcock from the bike I took it apart and checked out how it operates. The sharpie marks indicate how it really works. Now the other petcock w/o the sharpie marks is an old one that was leaking that I removed from a Polaris quad. It's exactly the same thing, except the small hose and nipple have been removed. I'm so confused, LOL
       

       
    • By Gwbarm
      I generally use Non Ethynol fuel in all my small engines. I just got back from the gas station and that fuel has really increased in price since last year, I will continue to use it, even though its north of 1.00 a gallon more. That seems minor compared to cleaning and repairing carbs every year. 
      I was just curious as to what others are doing in regard to gas in their quads, i know a lot of the newer ones are fuel injected which shouldnt pose a problem, but i have had lots of problems with rust and jell forming in carbs when using ethynol fuel.
    • By ButchM
      Hisun 700 EFI. Replaced TMAP sensor had broken off . Fuel pump pressure 41psi. The only way I can keep it running (and runs fine) is to close off fuel return line. 
×
×
  • Create New...