Quantcast
Jump to content

Recommended Posts

Posted

ok so im in the army and today was the first time in 3 years that i tried to start my quad.

i put fuel in it and it started to leak from a fuel line at the bottom of the carb. now of course it stopped when i turned the fuel off.

now usually when i was riding it several years ago the only time it would leak would be when doing wheelies or whenever its on the back bumper.

oh also its leaking from that line and not firing, its getting fuel from the main line and its getting spark.

just not sure why the fuel is pooring out and its not firing up.

Posted

Fuel will form gummy and sometimes hardened deposits when it sits for a while. Sounds like whatever fuel was left in your carb, and it doesn't take much. Has done just that. The reason that fuel is leaking out of the carb is because the float is stuck down and not rising to stop the fuel when the bowl gets full as it should. The reason that it won't start is probably because the jets are clogged. What you need to do is take the carb off the bike, take it completely apart and clean EVERYTHING, every nook, cranny, crevice and passage. Torch tip cleaners, carb cleaner, wire brushes and compressed air will be handy.

Good luck, and thank you for your service to our country.

Posted

You are welcome, and I will look forward to hearing how things go. As far as just doing your job, that may be so, but it is an important job, and we Americans (most of us anyway) appreciate what people like youself have done for our freedom over the life of our country.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By kevinohio
      Does anyone have a copie of the owners/operators manual.the basic book that comes with the atv.i need the smaller one.i have the great big repair manual one.
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
×
×
  • Create New...