-
Similar Forum Topics
-
By hengstserepair
Howdy ya'll. I am working ona 2000 Yamaha Breeze 125. It was in rought shape when I received it and I am working through issues as they pop up. The quad had been sitting for years. I was able to get her running again, but I need your help with the following issue:
I don't trust the transmission yet and I don't want to make problems any worse. So, I haven't pushed things hard at all. Low rpms, less than 5mph in reverse.
Nuetral: Runs as expected
Reverse: She seems to be driving fine at slow speeds. Going into reverse at idle is fine, coming out of reverse back into neutral won't work (the shifter is just stuck). As soon as I turn off the quad, I am able to shift around without any issue.
Forward: It slips. It seems to only transfer power to the wheels on a smooth surface and going slightly downhill. When shifting into forward at idle, there is a clacking sounds during the transition. Shifting back to nuetral works just fine.
Other Notable Symptoms: There was old oil in the vbelt and when I was tuning the carb, it starting blowing out of the CVT cooling vent at the front of the quad. Made quite a mess. There is positive crankcase pressure due to piston blowby, that I have not decided whether or not I am going to fix (customer budget dependant). Since the oil was old, much darker than the new oil that is in the crankcase, I am thinking it seeped past a bad seal while it was sitting for years. The oil that was in it when I first got it had gas in it.
Thoughts: I am thinking maybe there is an issue with the clutch. I worry about the old oil intermingling with the dry centrifugal clutch. I was thinking my next step would be to take the cover off of the clutch and inspect it.
Let me know what you all think. Any advice and ideas is greatly appreciated. This is only the 3rd quad I have worked on and I have a lot to learn.
Lorne
-
By yourmama
Howdy. Trying to help my neighbor get his Mule running. Hoping to get help here, thanks in advance for all the help.
-
By cokercreekguy
Hello all, from eastern Tennessee! I'm new to the forum. I just acquired a new-to-me 2016 Honda Pioneer 500, and am looking forward to learning from "the masters" here at QuadCrazy!
-
By mbirt
Hey all,
Just picked up two dead mid-90's Kawasaki Bayou 220s for $250. Already have one running on starting fluid and it sounds healthier than expected. Moving onto a thorough carb cleaning and refurb of the brakes next. These are our first ATVs and we're excited to make family memories on simple, approachable machines on our newly acquired land.
In case anyone reads this, is it worth rushing to 10 posts here to get the Bayou 220 FSM if I already have a Bayou 250 FSM?
Thanks,
Matt
-
By El_Guapo
Howdy- looking to pick the collective brain on all things Chinese ATV! rewiring a major basket case project Kazuma Falcon 250! any help with wiring diagrams is appreciated ! cheers!
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.