Kansasprairie400

I’m skeptical ordering Chinese replacement parts from Amazon. Are these parts adequate quality or should I attempt to find OEM?

I guess I have to have 10 posts and I currently only have eight so that’s the reason I can’t download the manual

OK, thank you I will look for it. Trying to download the manual from the site however it is really confusing. I haven’t figured out how to do it yet.

No spark. It will not start. I replaced the CDI unit and coil/splug wire and splug

I thought the stater may be malfunctioning due to the battery being swelled up. Is there also an external regulator somewhere? I’ve been watching some videos on how to check resistance. I will do that first before I tear into the side case. I assume there are probably some gaskets I would need also, if I did do that.

https://a.co/d/aVVmF2i I assume this is what I need? Is the pick up separate from this?

I’m not even sure where those items are at. I will have to do some investigation and see if I can find a Parts manual. Thank you

Was riding my prairie 400 the other day started to miss out and then just died no spark I pulled the seat off. The battery was swelled up. I replaced the battery would not start no spark pull the control unit and there was a round quarter inch hole broken out of the Gel coating on the back. I figured it was an internal issue and ordered a new module still no spark, replace spark plugs and coil still no spark. I’ve checked all the wiring and cannot find any issues. I am not that tech savvy and really need some help. Anyone have any ideas? thank you.

Still not having any luck. I looked on rockymountainatvmc but was unable to find anything. Can you post a link? Thanks Tom

Does anyone know where I can get grille letters or tailgate letters? The whole grille is solid black including the Polaris letters. Looks like they should be a different color. I found a listing on eBay for 21-22. I messaged the seller and was told they were not for a 23. Thanks, Tom