Quantcast
Jump to content


joshramsay

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by joshramsay

  1. joshramsay

    joshramsay

  2. hi gunna start by saying i got this on trade and was not informed of any mods this is gunna be a little long but really need help ive been struggling with it alot i found out for my self a dyno jet kit was installed ok so atv starts right away idles great when im riding in ANY gear EXCEPT 1st if i go to hammer the throttle the atv starts bogging it wont die it will just bogg till i let off the throttle and slowly climb up the rpms again for example... im driving in 3rd shift to 4th and snap the throttle it bogs but if i shift to 3rd and slowely use throttle it runs fine the other day i went to go climb a short hill not very steep or long in 3rd gear and just when i got to the top almost it stalled i tried again in 2nd stalled again put it in 1st LOW and it climbed right up today i went riding in some water (its snorkled and sealed verywell no water is getting in) and i cannot go through tire high water in anygear other then 1st it will just bogg and almost die in 1st it powers throught the watter BUT i did a water wheelie in 1st and just as i reached the peak of the wheelie it bogged in the water and i couldnt throttle without a bog till i got out oof the water... my carb is spotless ive cleaned it 10 times jets arenot plugged i can see light through every one diaghram is not pinched or poked my PMS screw is 3 turns out as advised and my needle clip is 3rd slot from the top battery is fully charged and not over charging i checked.. so im thinking 3 things 1 carb is running out of gas when snapping the throttle or going through mud or water or haveing any type of load ( dosent sound right to me though) 2 main jet to big stock says 138*with pump ..im running a 144 3 maby my clutch is not good any more ? i dont know... at this point im lost if anyone at all has some info id apreceate it i should be able to have low end power in 2nd 3rd and 4th depending on what im doing but i have no low end power in any gear other then 1st ... and my top end is suffering while trying to quickly accelerate
×
×
  • Create New...