Quantcast
Jump to content

Bronson Weddle

Members
  • Content Count

    2
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Bronson Weddle

  • Rank
    Forum Beginner

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I did a ohm check the pick up had 4.38 the black to green red to blue the stator did not put out nothing with just the key on then I cranked it still nothing am just going to replace the stator and the cdi Already have a new coil. And can tell me if a big bear rear brake assembly will on the bear tracker I have the brake part that the levers work the brake but don’t have the spacer or the hub I know some that has back assembly but it for a big bear or honda fourtrax but what I could tell it looks the same like what’s on the four wheeler. I let u know when I get into replaceing the stator and pickup and cdi. Thank you for answering me I can use all the help that I can When I got the quad they said they replaced the stator and coil but after further investigation it original
  2. I have a 1999 250 Yamaha bear tracker was told it needed a coil to run got into it to day found out that the kill switch was wired together then I found were they put a new cdi on it they cut all the plugs off the stator wires and the cdi wires I found bits and pieces of wireing diagrams blue pick up wire to red and white green wire to white and green wire rolled it over Had a test light on the coil wire it showed there was juice going to it but no spark on the plug and the coil is a brand new one put it on before trying to test the spark did I miss something or have something hooked up wrong already have plans on a new cdi and stator and pick up coil before I go that far like to hear it run. Thank you for the help in advance

×
×
  • Create New...