CaptJim

25 minutes ago, Mech said:

There won't be a red with red stripe.

Oops! That wire is Red w/ Black stripe that I have connected to the Red w/ Black stripe on the CDI. Also not sure how to get into the manuals, don't think I have enough posts yet?

You guys are the greatest for helping, Hope to be able to return the favor sometime.

23 minutes ago, Mech said:

If you can give us the colours of the wires on the stator Jim it might help identify the system

Mech,

the wires coming out of the motor (stator) are;

Yellow - I have attached to the rectifier yellow

Yellow - I have attached to the rectifier white wire 

Green - I have attached to green ground wire

Red with Red stripe - I have attached to CDI red w/ black stripe

Blue w/ white stripe - I have attached to CDI blue w/ white stripe\

The other wires coming out of the motor next to the stator wires are the ones I have questions about. They seem to be coming from a molded black cylindrical object that is held in place with an anchored clip and they are:

Green w black stripe

Blue w/ red stripe

Purple

 Pink

Light green w/ red stripe

Thanks again for the help!

Guys,

One other question... all the schematics that I am looking at show an emergency kill switch. I have no such switch that I can find, do I need one?

Again, thanks in advance, not sure where else I could get such advice and knowledge.

15 hours ago, Gwbarm said:

The wires at your green plug are coming from the staator, it could be for changing battery and hooking up to CDI if it has one, cant really see much from the photos.

Gwbarn,

There are five other wires that also come from the stator that I believe go to the CDI and Regulator. These wires go to a cylinder just inside the engine below the starter motor.

20 hours ago, Mech said:

Well you really need to identify the engine first

Mech,

The engine came from a trashed ( literally pulled it from a trash pile ) Kazuma ATV , here is the only number that I have found but cannot find anything to reference it to...

It does have an electric start, and I think I have figured out the five wires coming out of the stator but have no idea what the other 5 wires from the green connector go to.

About the front end... yeah, I realize that it is probably a little light, but it is what I had. besides, I'm 75 years old and won't be doing any jumps or wheelies. If I can find a smaller springer style front end at a swap meet, I will change it but until iI get it running this is a low budget project.

Thanks again for the help and advice.

I should probably mention that the engine is a generic Chinese built 110cc engine. not sure exactly what it came from.🤥

Hello guys, I hope I am not invading your space, but as you can see the current state of my project here it's not but about 50% ATV. I am hoping that some one here can point me to a wiring schematic that I can reference since the "Complete wiring harness" i purchased from Amazon did not include a diagram of any kind.

The ones that I am finding on line vary greatly but none show the connections for the separate 5 wire connector coming from the motor.

Can someone tell me where these wires go?

Thanks in advance for all help!