Quantcast
Jump to content

KIWINZ

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by KIWINZ

  1. Hi Turns out it was this part 90508-29570-00 - Yamaha OEM Part 90508-29570-00 SPRING, TORSION which returns the gear selector shaft to a return position - not neutral
  2. Yes it is. That's the video I used to figure out how to select reverse. Only managed it one. I cant select first or neutral. I know they are in their somewhere as i managed once. I did some more looking last night and came across this picture and description on Facebook. It appears that the bolt holding the "segment - 5H0-18185-01-00" can come loose and/or the keyway on the drum breaks which means that the shift drum wont rotate correctly and therefore gears wont be selected. Looks like I have to take the RHS cover off and the clutch basket out.
  3. Hello My son scored a free Moto4 - late 80s from the looks of it. I don't know anything else about its history as the owner wasn't there when i picked it up. Can't see the VIN number as its a bit rusty. He cleaned the carb and then with some either it started and still starts first pull. Its runs really nice - not rattles etc. Goes forwards well and the brakes work fine so it looks like a keeper, However, we have only managed to get it into reverse once. 1) it won't shift down into what seems like where first would be - 2nd and upwards only. The changes between gears is fine. No crunching or missed gears - just no first gear. 2nd gears appears to be as low as it will go 2) the clutch - when you hold the gear lever up or down works (only the second ATV we have had. Other is a Quadrunner which doesn't have this feature) 3) no neutral light - will start when no in neutral - should it do that? 4) the one time we did get it into reverse the neutral and then the red (reverse) lights worked. Swapped easy between forward and reverse - when it went into second, it didn't return to first or neutral 5) checked the clutch adjust on the RHS - seemed fine to me. When i turned the screw back 1/8 it was where it was to start with. Clutch doesn't slip. The bike will move forward is all gears. Any help would be appreciated Thanks Andrew
×
×
  • Create New...