JAVUTV

ok and how test it? because i thought on the TP sensor¡

all is clean since air filter until tho body trottle...

yes, work good the fuel pump, i have a cuestion, if is posible change the mixture in this sistem the FI? because you are right there is a rich mixture the sperk is very black

Or some sensor is bad

yes it push fuel: the atv road but only 2 mill x hr aprox not has force

what i do¡

thank for reply as quick....i had chekd various think, is 2007 and i dont know much over fuel injection. and review the manual..measures,volts etc but the truth im losted--

change the fuel pump and not passing nothing

hi if already test the wires until batery,,,and continuity in the switch that activate the light on the motor lookfor a small black thing it is a diode quit and probe it with the ohmmeter.... or jumper the connector with an wire piece....luck

hi, i have a problem with this atv, now the motor works but hasn´t force i changed tue fuel pump and continuous equal

somebody help me¡¡¡

Hi stoopidbooth1 yuo´re rigth my atv is 450r 2005

Thank you for help me¡¡ and yes this model only has a kick start for model put me see one more time on its labels

Hi friends have a problem with my atv¡¡ it no start moro because there isn't spark what will be¿

put a new spakr plug and nothing the swiths are ok¡

give me some idea plase.....

THE RESISTANCE IN NEXT WIRES I DONT KNOW IF IS OK (this wires are of stator which feed to the CDI)

WIRE WHITE/RED DASHED BLACK=36.9 OHM

WHITE/WIRE BLUE=8.4 OHM

HOW I DO IT FOR TO CHUCK THE CDI FO THIS PROBLEM

The warrior is 2000 also i have test with liquid starter and nothing

Hi¡¡¡ who can help me with my atv

already i've checked almost all it has spark,so much compression 150psi, only i believe q is the stator i quit it and has 214 ohms the pulser and other coil 1925 ohms i not have specs neither nothing......

I think mojaverider is cool¡¡¡¡

Hello¡ i need help my warrior dont start

somebody tell me the specs to stator

it has spark but dont start either pop nothing

I CHECK TIMMING AND APPEAR BOFORE T I DONT KNOW IF ITS CORRECT OR NOT

COMPRESSION 150PSI ....now i have checked the resistance in 4 wires in the stator RED & WITHE=219 OHMS AND THE OTHERS 2 WIRES GREEN STRIPED YELLOW=1195 AND YOU HAVE REASON DIRTDEMON IT HAS A PISTON J.E OK I DON'T HAVE THE SPECS THEN WHAT I DO??

HELP ME¡¡¡