-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Everything posted by JAVUTV
-
ok and how test it? because i thought on the TP sensor¡
-
all is clean since air filter until tho body trottle...
-
yes, work good the fuel pump, i have a cuestion, if is posible change the mixture in this sistem the FI? because you are right there is a rich mixture the sperk is very black Or some sensor is bad
-
yes it push fuel: the atv road but only 2 mill x hr aprox not has force
-
what i do¡
-
thank for reply as quick....i had chekd various think, is 2007 and i dont know much over fuel injection. and review the manual..measures,volts etc but the truth im losted-- change the fuel pump and not passing nothing
-
1994 Honda 300 - Won't Light In Neutral
JAVUTV replied to GreasyAccountant's topic in Honda ATV Forum
hi if already test the wires until batery,,,and continuity in the switch that activate the light on the motor lookfor a small black thing it is a diode quit and probe it with the ohmmeter.... or jumper the connector with an wire piece....luck -
hi, i have a problem with this atv, now the motor works but hasn´t force i changed tue fuel pump and continuous equal somebody help me¡¡¡
-
Hi stoopidbooth1 yuo´re rigth my atv is 450r 2005
-
Thank you for help me¡¡ and yes this model only has a kick start for model put me see one more time on its labels
-
Hi friends have a problem with my atv¡¡ it no start moro because there isn't spark what will be¿ put a new spakr plug and nothing the swiths are ok¡ give me some idea plase..... THE RESISTANCE IN NEXT WIRES I DONT KNOW IF IS OK (this wires are of stator which feed to the CDI) WIRE WHITE/RED DASHED BLACK=36.9 OHM WHITE/WIRE BLUE=8.4 OHM HOW I DO IT FOR TO CHUCK THE CDI FO THIS PROBLEM
-
The warrior is 2000 also i have test with liquid starter and nothing
-
Hi¡¡¡ who can help me with my atv already i've checked almost all it has spark,so much compression 150psi, only i believe q is the stator i quit it and has 214 ohms the pulser and other coil 1925 ohms i not have specs neither nothing......
-
I think mojaverider is cool¡¡¡¡
-
Hello¡ i need help my warrior dont start somebody tell me the specs to stator it has spark but dont start either pop nothing I CHECK TIMMING AND APPEAR BOFORE T I DONT KNOW IF ITS CORRECT OR NOT COMPRESSION 150PSI ....now i have checked the resistance in 4 wires in the stator RED & WITHE=219 OHMS AND THE OTHERS 2 WIRES GREEN STRIPED YELLOW=1195 AND YOU HAVE REASON DIRTDEMON IT HAS A PISTON J.E OK I DON'T HAVE THE SPECS THEN WHAT I DO?? HELP ME¡¡¡