ac700
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forum
Gallery
ATV Magazine
Events Calendar
Downloads
Store
Community Map
Posts posted by ac700
-
-
you need to check the connector from your stator. they are very prone to failure! the connector melts and causes a short. this connector is of poor design. as for the pulling to the side your caliper may be seizing or a very bad wheel bearing. i dont know the history of your machine so its hard to tell
-
just wondering if anyone has an epi clutch kit installed in there wheeler? if so maybe you could tell me a few dislikes if you have any? im purchasing at big wheel kit for mine should be here tuesday.
-
thanks guys ill rip into it and see wth is goin on with it......it finally stopped snowing for a few days!
-
2008 700 with 170 miles on it. first 160 miles was trail riding ive since been plowing snow thats it. i have to give almost 1/4 throttle now before it will move? also i have to use the reverse override everytime i back up otherwise it will cut out before i even move. ive heard of a secondary clutch upgrade what is this? i havent checked the belt yet because it wont stop snowing long enough.....lol! that was laugh with sarcasm for sure! is it possible the belt is worn that much already?
-
You can switch the diodes out with another in the fuse box to see if one is bad.
The overide feature is exclusively for reverse. There is a way you can bypass the override switch if you are intrested but you should probally find the cause of your problem first.
hey swapcat im definetly interested in bypassing the reverse override any help will be appreciated i ride an 08 700efi im thinkin 07 was the same?
-
just thought id ask if anyone has figured out how to bypass the reverse override completely in other words figured out to make it so you dont have to push and hold the "yellow button" at all. id like full reverse power in 2wd and 4wd. anyone figured it out?
-
Wiring diagram for 2007 Arctic Cat 700 EFI 4x4
do you suppose the wiring diagram for a 2008 is the same as 2007?
2007 Arctic Cat 700 EFI 4x4 Wiring Diagram
in Arctic Cat ATV Forum
Posted
also you need to check battery voltage (at the battery)when your machine is running. should be 13.8-14.2volts constantly even when rpms are increased.