bodatiouskid

Have a 2002 Kawasaki 650 Prairie.Have just had carbs rebuilt($950 bill) & it still pops back through carbs.Mostly at 1/4-1/2 throttle.What can I tell mechanic to do when I take it back?(A Kawasaki dealer mechanic)

I know a belt for a Kaw. 700 will fit,but are there belts for other models that will fit that are a little thicker or shorter?

my 03 650 does that same thing also... I have a shim to put in mine if I can ever get around to it .. the shim is cheap.. but a pain the the but cause ya gotta take the clutch apart to install it ..a clutch kit will also solve it ..I have fixed the same issue b4 on a 700 with the clutch spring kit ..it allows the motor to rev just a little more b4 it grabs ...

Took out secondary & took apart.Had 2 shims(a thick&athin).Took out the thin & re-installed secondary.Still squealled.Took out secondary,pulled apart & took out thick&re-installed thin.Re-installed secondary.STILL squeals @ takeoff but not as bad.Left that way because didnt know if I should take out both shims.

I have a 2002 Kawasaki 650 Prairie.When I first take off I have a belt squeal in the front pulley.Have gone inside pulleys with medium sandpaper but still have squeal.Installed new belt & still have squeal.

Any suggestions?Would like to fix without spending $$$ on new parts.

Fiddled a little,but its been to hot here to do very much outside.

Have a 2007 Yamaha Grizzly 660 4x4 ATV.The problem is I cant get shifter to go in park.Had lost the mounting bolts to the shifter but still could get in park.Replaced bolts & now cant.

Any suggestions?

Thank you.Tried it & worked.

Is there a way to turn off belt light on a 2004 Twin Peaks 700?