Quantcast
Jump to content


dusty011

Members
  • Posts

    7
  • Joined

  • Last visited

Posts posted by dusty011

  1. new to site !!

    Power washed a 2006 500 h/o efi x2 last night and now it wont start havent really looked at it but thought i might figure out where to start.

    Started fine before I washed with power washer under the seat.

    Turn key on fuel pump cycles and then just clicks at solinoid as I try to start it, doesnt seem to be sending power to starter!!then get this weird buzzing,clicking sound coming from somewhere by the carberator. battery is good load tested it fully charged. quick pull with the cord fires right up.

    Again it was late last night never really spent any time to check all connections.

    Never had this problem with my arcticat hahah!!!

    Thanks

  2. Hey everyone! I hope someone can help me out.

    I have a 95 LT-F4WDX that I have been having a strange problem with. It starts & idles perfectly but when I try to rev it up it spits & sputters. I found about 2 weeks ago that when I turned the switch to "headlights on" it ran fine. That worked for a few days but then I had to position the beam selector switch in the middle of high/low beam for it to run right. That worked for about two days, now it must be on low beam & it has to warm up for about 15 - 20 minutes before it will run ok. When switched to high beam, the lights go out & it dies. It seems to me like it needs to have a load to keep running right.

    Anyone have any ideas?

    Thanks!

    Sounds like you have some wire chaffing going on start chasing wires and cleaning conections you will find it. print off a wiring scematic.

×
×
  • Create New...