Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Acdacd

93 Timberwolf brake drum won't fit over new brake shoes

Recommended Posts

Hello- tried to install a new rear brake shoe today and when trying to install the drum back it will no longer fit.

 The adjuster is all the way in and we used a course wire attachment to get rid of anything on the drum itself. 

As a last ditch effort we even tried filing some of the brake itself and that didn't even help. 

Not sure if this is relevant but it took 45 min or so to get the drum off intially, it didn't  want to release.

Any advice will help!

 

 

 

Share this post


Link to post
Share on other sites


You may need to file more or look over all the contact points to see where its hanging up. Check out this video, they had to file as well.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By emoyer105
      I have a Yamaha Timberwolf 250 2x4 that I purchased a while ago as a project. I fixed it up to where everything was working great in my opinion, however when I showed it to a potential buyer he complained about a vibration from the rear drive shaft. (Which I ridiculous seeing as he tried to wheelie it before that) Anyways I took the rear diff apart and found most of the seals and bearings where bad. So I bought a kit off of amazon only to find that it doesn’t have all of the bearings and seals. After finding that I decided to try to find a used good condition replacement but they’re all to expensive for me so is there a better alternative for me, or can someone point me in the right direction to get the rest of the parts?

    • By Lellwyn Griffin
      I think my rear brakes are stuck.  Is these parts in the right position?  Any idea how I repair?  I have to give it more gas to go and I can't push it when it's in neutral.  


       
    • By JacobSlabach
      hey so never ran into this before but i recently got a 04 honda rubicon 500.  bought it from my doctor not running and the front brakes were locked up.   cleaned the carb and it fired right up and runs great.  these model atvs have drum brakes front and rear.  not a fan.  lost all brakes on this one when i hit some water and it got inside the rear drum case.  so i ordered new shoes for the rear end no biggie.  front is more complicated.  has hydraulic drum brakes not sure who thought that was a good idea but the pistons in the drums rusted and locked up from it sitting with moisture in the drums.
      so i had a choice to make- 1. buy new brake pistons ($120 for a set of 4) or 2. order super atv's disc brake conversion kit for $250.  i HATE drum brakes so i went with the conversion kit.  it said it was easy to install with no specialty tools.  so i order it and turns out i have to press the studs out of my hubs to get the disc on.
      anyone ever done this and if so how?
    • By Micah Gafford
      I've had a seriously annoying time trying to deal with the brakes on my rebuild. What size is the fitting that screws into the inverted flair cross and into the caliper? I plan on trying to make parts I need with braided steel hose.
    • By michaelnewell
      I took front brakes apart recently and found pistons frozen in calipers. Havent been able to find cheap calipers for this bike
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...