Quantcast
Jump to content

Recommended Posts

Posted (edited)

I have a1999 Yamaha bear tracker 250cc one day I started it with choke on and it idled for a min then clicked some and shut right off. I was using the pull start to start cause something wrong with starter but it won’t pull any at all now like it’s locked up  can someone tell me what the problem might be

Edited by Allen Junior
Posted

Welcome to Quadcrazy. From your description it sounds like you heard a noise and then it shut off?  Is the bike in neutral ? It’s possable that the engine is seized up.  I would take the spark plug out and try to pull start it to see if the engine turns over.  Then drain the oil if there is any oil in the engine and see if any metal pieces are present.  It’s also possable that something else is locking up the engine causing it not to spin like a blown clutch bearing, maybe something came apart in the stator coil area or transmission. 

  • 2 months later...
Posted

Yes I took out the spark plug and still won’t turn over I took apart the pull string housing assembly and was looking to see if something might have came apart in there but nothing      I can  turn back and forth about a quarter turn each way the part thats used by the pull string to start the engine but no more then that I also sprayed blaster down in motor where spark plug was just to see if maybe it would free up after sitting but didn’t work.    HELP PLEASE 

Posted

Welcome back Allen. It honestly sounds like the engine has seized. I would take the head off exposing the piston and cylinder to see if there is any damage inside the cylinder walls. And maybe go further into this by taking the cylinder off completely. 

But prior to any of that make sure your not missing something else like the starter bearing or in the stator coil area   

Did you drain the oil? 

I have the same bike and it’s reliable and tough. But if there was no or low oil well that’s that! 

Hopfully you will find out and keep us posted. I’ve been a little busy since I opened up my own company but will try to check in from time to time. 

Goos luck. 

  • Like 1
  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By wanrep
      View File 2019-2024 Yamaha YFZ 50 service manual
       2019-2024 Yamaha YFZ 50 service manual
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By wanrep
      View File 2017-2018 Yamaha YFZ 50 service manual
      2017-2018 Yamaha YFZ 50 service manual
      YFZ05YYXH
      YF05RH
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By RadRob
      I am new to this site. I have a 1987 Suzuki LT230S Quadsport I think. Is there a difference between quadsport and quadrunner?
    • By Thumpinhard25
      First thanks for any help guys, new to the forums and it's gotten me this far. I bought a 2001 bear tracker 250 for my family to get around the dirt bikes races. It wasn't running right and had a high idle. Previous owner thought it was a carb problem, so he ordered a new Zoom carb and new intake boot, but it still had the same high idle. ( I believe he had the throttle cable adjusted wrong, because it idled fine when I put it back together) So I tore down and cleaned the stock carb, and it started up and idled fine, but needed to have the choke 1/2 out to run.  I swapped to the new zoom carb and had the same issue. Choke half out bike ran ok. I played with the needle and the pilot screw with no change. ( bike did seem to be running rich though, but didn't get better when I tightened pilot screw or raised meddle) I Took it to the races and once I started bouncing around in the cattle fields the quad started cutting out real bad. It would barely run.  Sometimes it would run with choke off, sometimes choke 1/2, sometime choke full. I cleaned carb again, checked float level, and boots, no change still wouldn't run. Then suddenly it started running ok again.  This makes me believe it's an electrical issue rather then carb. I know there's no air leak, it's been checked, both carbs are clean( I've swapped them out a couple times, it starts up immediately and usually idles fine. But then bogs down/ or stutters under throttle. I saw the post on the guy who disconnected his rectifier and reconnected and suddenly it started working again, which lead me to believe it may be electrical and not carb.  So any advice on what I should check? Any way to test the CDI or rectifier?  Once again, I appreciate your help.  
    • By Gunny
      Hope you enjoy the video ....
       
       
       
      ...
       
       
×
×
  • Create New...