Quantcast
Jump to content

Recommended Posts

Posted

Question for you guys that have worked on a Kodiak, I was wondering since it has a push button 2x4 to 4x4 does it have a slipping front differential or is it a locking front differential.  If it's a slipping diff, has anyone tried to make it power both front tires at the same time?

Thanks

  • 3 months later...
Posted

The 2000 Kodiaks are limited slip as are all Yamaha front diffs with the exception of the diff lock models. There is no way to make that particular diff have diff lock. The only way to do it would be to swap out your front diff with a diff from a locking diff bike, 450, 660 Grizz etc. Axles and driveshaft would have to either match up or be swapped. Once that's done, we have a stand alone wiring kit that you could use for the electrical portion. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By Fonne
      Hi 
      Is looking for a quad to pull a flail mower as my first priority, but also a bit of fun. 
      So its going to be pulling a flail mower on high grass / weed on a bumpy field at pretty low speed. 
      My budget is not high, so is mostly looking at a old Yamaha Kodiak 400cc / Suzuki Eiger 400cc or similar. 
      What machine would you recommend  ?  - Really want a solid machine since I am no mechanic but can perform a early service myself. 

      (English is not my native, hope it makes sense)

    • By noticon75
      Anyone ride at in the north east Kansas area? Tuttle Creek, Milford lake areas, Topeka?
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Maxg_57
      Is anyone still active on this club
×
×
  • Create New...