Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Mark&rocket

2000, DS650 - Need front replacement shocks.

Recommended Posts

I have a 2000 DS 650, with stock front shocks.  Bombardier Pn. FRONT SHOCK: 706 200 081 has been discontinued.  I am not looking for a racing type replacement, just somthing that will work properly.

Any assistance will be much appreciated.

Share this post


Link to post
Share on other sites


On 8/10/2018 at 10:29 PM, Mark&rocket said:

I have a 2000 DS 650, with stock front shocks.  Bombardier Pn. FRONT SHOCK: 706 200 081 has been discontinued.  I am not looking for a racing type replacement, just somthing that will work properly.

Any assistance will be much appreciated.

 

Share this post


Link to post
Share on other sites
On 9/5/2018 at 5:31 PM, Mark&rocket said:

I dont see any visible signs that they could be taken apart.

Hope the attached pic can help

20180810_142536.jpg

?

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By ATVNetwork
      Three Palms Action Sports Park in Conroe Texas would host the first doubleheader in the 2020 ATV Motocross National Championship (ATVMX) Series, an AMA National Championship, on September 19 and 20.
      View the full article
    • By Brock Kincaid
      Ok so just picked up an 02 ds 650 and the guy said he couldn't get it to start. He had a shop put new shims in it and I had them checked and they were ok now things I've done is new plugs even though guy had just put new plugs in it.. got new carb 42mm just like the one that was on it.. bought new intake manifold because the one that was on it someone got way to tweaked out and ported the shit out of it excuse my language but yeah so installed new intake manifold and it just won't start like its not getting enough fuel.  Timing seems to be right it does fire every now and again but just barely.. did a compression test today and it was at 90psi.. i know thats low but don't know where I'm losing compression.. valves we at .06 and .07 when checked im lost ive tried everything I know and can't figure it out
    • By Jeff Cotter
      I recently purchased a 2000 polaris xplorer 400 4x4.  When I bought it the starter was bad, speedometer didn't work,  and it had been sitting for 5 years. I replaced the battery, and starter. Changed all fluids, and got it running correctly.  Then replaced the speedometer in an attempt to make sure the awd would be available when needed.  And took it out for a couple hour ride with a buddy.  
      It ran great that ride with no serious problems just a little carb issues which I was able to take care of on the trails.  Then a couple days later I decided to take it out for a ride by myself,  again ran great no issues other than a couple times it seemed to cough and then take off again.  That day when I was loading it I noticed coolant dripping onto the trailer and the overflow bottle was empty.  
      Got home and decided to drain the counter balancer, when I did that I got about 3 cups of coolant. Im guessing that it needs new seals and all for the water pump.
      My question is how difficult is it to do the water pump and should I attempt it or should I send it down the road to the polaris dealership to get it done? 
       
    • By Wayne Carson
      Has anyone found a good replacement for the stock cooling fan? Mine is going out and OEM parts are outrageous. Polaris sportsman HO XP 850
    • By schef
      I have a DS 650x available.  Garage kept for its entire life and runs well.  OMF beadlocked wheels.  Located in San Antonio Texas area.  I’m motivated to sell and work with shipping options but serious inquiries only interested in a large sport ATV that won’t come around again.
      Here’s a photo from a few weeks ago.  I can send over more photos, videos, or we can have a FaceTime session to take a look remotely.  Let me know.
      David

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...