Quantcast
Jump to content

Recommended Posts

Posted

Help ....... I am not mechanically minded 😳 so any assistance you could give would be greatly received.  I was ridding the quad and it cut out, before it cut out it made a couple of pinging noise’s I think it was from exhaust ?

many thanks

Posted

😊 yes it would help.  It’s a Yamaha Bruin 359.  When I tried to restart the first time, with choke it started but then cut out when I gave it revs.  Electrics were fine as when towed back hazard warning lights were on.  Before it cut out, there were a couple of pinging sounds from the exhaust I think.  Also, when towed back I had the ignition turned on, so the hazards could work.  As I got to the top of the hill I was able to free wheel down, when I got to the bottom there was a buzzing noise coming from the steering column and a little smoke started coming out as well.  Did the free wheeling cause a 2nd problem?  Electrics are still working

Kind Regards

karen

Posted

free wheeling cause a probleme only if your brakes were applied as long as your were in Neutral positiion.

If it stopped, while working, maybe u had a fuel cut-out? check your fuel filter and carburetor

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Rich1028
      I Crashed My Quad
      Well the Way I Ride, some of you knew it was Inevitable.
      Below are Three Videos.
      First one is Slow Motion of How it Happens.
      Second one is Normal Speed, and what happens after the Accident.
      Third one Follows more of what happens after .

      I Was Riding By Myself. I was going through a Mud HOLE Either there was a log or a rock, or A Dip but just as I was almost through it, Machine, Rolled over on my right side, as soon as I contacted the ground, I Heard A SNAP! I got up, flipped the Quad back over. I had the wind knocked out of me.

      5 broken Ribs
      1 Punctured Lung
      1 Broken Collar Bone
      2023 Quad Riding Season is Over for ME!
       
       
       
    • By P_syko
      I’m brand new to 4 wheelers and just bought a 1987 Yamaha Moto 4 350. It has good compression and fuel, but no spark. I’ve looked high and low trying to find how to test all the components of the ignition system, but can’t find anything. This has a new CDI box on it, but I suspect it might be the stator. How do I test the stator on this? Any help would be greatly appreciated! 
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By Ethan7387
      Hi could someone please help me, not to sure what engine this is 


×
×
  • Create New...