Quantcast
Jump to content

Recommended Posts

Posted

Hi folks. 

Winter is creeping up on eastern Canada and I felt the urge for a toy to hold me through the winter while my trusty Honda CBF600SA snoozes.

Can't do it easy tho.... has to be a project of course! So on the weekend found me a mostly there 91 Kawasaki Bayou 300 KLF300. And tonight a 94 300 parts quad followed me home!

Hopefully I'll have the runner under its own power this weekend. Seller had a terrible time to get it to start, and when it did would only run for a few seconds. .. but enough to hear it and know there was some life in her! Planning a valve adjust, new fuel line (current is super hard and probably brittle as all heck!), and maybe a carb once over. 

Maybe I'll even try and make this thing un-ugly again later on. 

Anyhow, glad to be here!

Getmoresoon 

IMG_20181014_145153270.jpg

IMG_20181014_145201148.jpg

IMG_20181014_145220661.jpg

IMG_20181014_145233917.jpg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By joshualutz
      so we got this little lt80 given to us when we bought my sons dirtbike as kind of a throw in gift it was just sitting not being used and my youngest fell in love with it so the gentleman we bought the bike from said we could take it as well for a little project 

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By USRaider
      Hello all!
      I was given a 2000 Suzuki Quadrunner 500 (Quad 500 Runner?) and its current state is a bit of a mystery!  
      Kept indoors but hasn't been run in 5 years.  We're not trying the engine until the gas is replaced, and the tires are reinflated. But the previous owner said their only issue was stalling when shifting to reverse without giving some throttle.
      I'm optimistic!  See y'all around!
    • By gordonmacritchie
      on my honda trx 500 we have no power to the ignition switch for starting or ignition
      we have lights and horn working
      all fuses are fine
      have traced through the harness and cant find any broken wires or bad connections
      from what we have gathered so far the pgm fi unit is not sending any power to the fuel pump relay to power everything up.
      if we put power direct to the ignition switch plug then everything works but wth the key in the off position.
      does this sound like a faulty pgm fi unit?
×
×
  • Create New...