Yamaha yfz 450 2013.
-
Popular Now
-
Similar Forum Topics
-
By Machias_Mike
Hi all,
Just looking for a second opinion before I start ordering parts. It looks like from the below tests it must be a failing stator.
Background - quad runs fine but when I use winch it will drain battery, I can then pull start but even after running for 20 mins if I turn it off, battery still dead and does not seem to get charged at all. Voltage at battery after charging using trickle charger is 12.5. Start up and voltage shows 13.1 at idle, if I rev it up voltage drops to 12.5. LED lights also flicker at night even with fully charged battery. Really more annoying than anything and if it is stator I prob will not change until it becomes more of an issue or maybe during next oil change.
Thanks for looking, appreciate any replies!
Stator plug and letters show how I tested.
[ ] A [ ]
B C
[ ]
Checked resistance on stator (manual says .1 to .7)
A = .7
B = OL
C= OL
Voltage idle and 3/4 throttle
A = 31/55
B = 15/33
C = 15/32
-
By Quadman11
Hi Guys, First post.
I'm Having an issue with my KLF300 2X4.
Just purchased a 2000 model KLF300, when i first rode is i noticed the gear shifting from reverse to first and vice versa was extremely hard and stiff.
Now When the bike is running it is Shifting straight past neutral into reverse without using reverse lever, making neutral impossible to find. Also the neutral light and revese light has stopped working. To get the bike started i grounded the green wire coming from the switch so now i can start it again but the shifting issue is still there.
I have adjusted the reverse lever and cable so that it is fully retracting but this hasn't changed anything.
Can anyone recommend anything to check etc?
Thank you.
-
By Ajmboy
Just got this one and am sharing...
Visit 4wheelparts.com Use Code: POLARISORV at checkout *Exclusive offer ends 6/17/19 at 11:59 pm CT
-
By Guest
I want to hear about your favorite lift table brand! And why do you prefer it?
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.