Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Similar Tagged Content
I have a Yamaha Timberwolf 250 2x4 that I purchased a while ago as a project. I fixed it up to where everything was working great in my opinion, however when I showed it to a potential buyer he complained about a vibration from the rear drive shaft. (Which I ridiculous seeing as he tried to wheelie it before that) Anyways I took the rear diff apart and found most of the seals and bearings where bad. So I bought a kit off of amazon only to find that it doesn’t have all of the bearings and seals. After finding that I decided to try to find a used good condition replacement but they’re all to expensive for me so is there a better alternative for me, or can someone point me in the right direction to get the rest of the parts?
It will go into neutral, 1st, 2nd, and reverse but nothing after 2nd gear. The shifter moves freely going up completely nothing but when you shift down it works. I’m not sure if it’s tranny issue worth messing with or if I should just buy a new one. Overall besides that the thing runs like new.
I was given a 2008 Yamaha Timberwolf by my in laws a few weeks back. Of course my FIL said it hasn’t run in 8 years but all it needs is gas and oil!
That hasn’t been the case...so far I’ve replaced the spark plug, changed air filter, replaced battery, replaced fuel and oil filters, fresh oil and gas. I tried starting her up and no luck, it turns over but won’t get going.
Now I’ve moved on to cleaning the carburetor which I’ve heard is a common problem area. I can’t figure out how to remove the bowl at the bottom, any suggestions? I removed the four screws that I thought were holding it in place but the bowl won’t budge
Thanks and looking forward to getting her running!
Some photos of what I’ve got going on , this has taken over the garage
Just picked this up at a yard sale, runs and drives..color coded wires for battery were backwards, Meaning a red wire was used for negative and a black for positive....
Upon bringing it home decided to boost the battery and walked away giving it a small charge prior to starting it..came back to find battery slightly smoking and my Green light for power (neutral) was no longer lit up...Still starts when i pull start it with key on.
Turn key on and no starter spin up, no lights
Id like to get my Electric start working, What could be the problem, Where does one start.
Hello guys! New to the forum, and fairly new to ATVs. I've driven them, but never owned one. Now I do own one. Just picked it up today. It's a 1999 Yamaha Big Bear 350. It's been through some stuff. The guy I got it from told me the previous owner removed the front diff because he didn't want to replace the half shaft. So it's 2wd, even though it's supposed to be 4x4. Lovely. I can deal with that for now.
More importantly, I need to get it running. The carb needs to be rebuilt. The guy I got it from said he sprayed it all out and it still didn't work. I'm concerned he might have damaged it or not put all the parts back. I was looking at a replacement carb, and the OEM parts is $600. I'd rather not spend $600 if there are any other options. I have seen carbs on Amazon and eBay that are in the $40 - $100 range that say they fit. Anyone have experience with these? I'm going to get a rebuild kit for the current carb just to make sure that won't fix it.
Thats the first thing with it. Secondly, it was completely rewired. I need to find a original wiring diagram so I can put it back how it was, with a key and all. Currently it's wired with just a rocker switch. Any sources for a service manual that would include wiring diagrams?
Thirdly, is the Big Bear 350 a good atv? I picked it up for $700. It does start and run when you spray starting fluid into the air intake, so I am not concerned about the engine being bad. I plan to use it for the farm, running around and carrying things with it like minerals and feed and such. Not really for mudding and things like that. How good is the 99 350?
I am certain I will have more questions as I examine it more, but that's all for now. Thanks in advance for the assistance!
Just a couple of things since i get various atvs.
They always need seat cover and always need oil and other minor items.
My question is Do you buy any specific motor oil for them, i heard you must get atv oil or will mess up the clutch.
Not sure if correct but didnt want to find out hard way. Is there a cheaper oil or can you use regular motor oil?
Next they always need a new seat cover, any good places to buy bulk or cheap vinyl to re do the seats with out spending
30-50 dollars on a specific cover?
whats you go to places for parts, i use amazon, ebay any others that offer a good deal?
that goes for hard parts or just cables and or clips, wiring, bolts etc no wrong answer here.
always looking for new ways to find parts for the older atvs. TIA Az
Friends, being the owner of a far from new ATV, I often come across a search for various owner's manuals, service guides, parts manuals, etc. It is not easy to find suitable documents for every quad. Therefore, I present to your attention a website that contains various instructions for ATVs from well-known manufacturers: https://www.ATVownersmanual.com
Currently only 3 manufacturers are represented here: Can-Am, Polaris, Yamaha - and only about 1200 instructions for various models. Little later other brands and missing instructions will be added.
What will be convenient for you: all documents are in PDF format. If necessary, you can download them to your computer and use offline. The documents are structured by brand, year and model. There is no advertising (yet).
I am happy to hear criticism and recommendations. If you have missing or rare instructions, send them to PM or to the website's email: info [...at...] atvownersmanual [...dot...] com.
Recently Browsing 0 members
No registered users viewing this page.