Quantcast
Jump to content

Recommended Posts

Posted

Hey,

I purchased a 1994 Kawasaki Bayou 400 4x4 which was running fine when I had all of the plastics off and now that I have put all the plastics back on the machine I am getting some strange symptoms. With the ignition on (neutral light on) and  having the kill switch in the RUN position now have no crank, no spark. But when I put the kill switch in the STOP (or off) position the electric motor crank, but still I am getting no spark. Is it normal for the ATV electric motor to work in the off position and not in the RUN position? It wasn't doing this before. I have replaced the spark plug and the ignition coil so far.  I am wondering if something is getting shorted after I put the plastics back on? Any ideas? If it is a short any ideas how can I track it down?

Thanks!

  • 2 weeks later...
Posted

Is it possible for someone to post a screenshot of the electrical diagram for the 1994 Kawasaki Bayou 400 4x4  (North America version) or message me. I only have 1 post so I do not have access to the archive of manuals and I don't want to spam posts to get to 10 post which is needed to access the manuals.

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By prdicon
      I was looking to buy a new ATV. 
      I was debating between Polaris sportsman 450 and Honda rancher.
      Polaris it a bit cheaper.
      But can you tell me which one will have more demand on the used market? Which one will keep it's value better?
       
      Let's say 3-5 years from now.
    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By wilmpie
      hi everybody
       
      I have a kymco mxu 250 automatic from 2006 250 cc  that keeps going forwards or backwards when i shift backwards or forwards an then shift to neutral .
      if i shutdown the motor and push the quad and restart then its in neutral and don't go forwards or backwards, i already checkt if my motor is running good stationairy .
       
      what can it be or what can i do to fix this?
      thanx in advance
      p.s. Sorry for my bad english it's not my first language.
       
       
       
    • By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • By cruteg8
      I was thinking about trying to repair some cracks in the plastics of a Lakota Sport i just purchased has anyone ever tried (U.S. Chemical & Plastics USC GarageTM Flexible Glaze USC-77704 it) https://www.ebay.com/itm/364866165725. i was thinking jb weld for plastic then using this as a bondo that can be sanded smooth 
×
×
  • Create New...