Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.

2005 Kawasaki 750 Brute


Terry Stormer
 Share

Recommended Posts

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By alexwv1863
      I'm working on my buddy's 1988 Suzuki Quad Runner 250 2x4 and I'm having some issues.  The main issue so far is I can't get the dang thing to start.  When I try craniking it with the electric start, all it will do is grind.  Occasionally it will backfire once at a time.  That doesn't happen every time though.  I have read that some 4 wheelers have to have the hand brake engaged before it will start.  I'm not sure if this is one of those or not.  The carb is brand new, fuel pump works, brand new battery, gas is fresh.  There isn't a choke cable right now.  What am I missing?  What would you recommend me trying?  Also, how is this 4 wheeler's engine supposed to be cooled?  Today was the first day I've actually started going through it.  There are several parts he needs to order.  I'm just trying to get it to start first before any more money is spent on it.  Thank you for your help.   I really appreciate it.
    • By Charlesawest936
      Hello QuadCrazy guys and gals. Iv got a 2007 Kodiak 450 that's iv been trying to get running again after having to split the case so I could change a few of the transmission gears since the previous owner over did it and broke teeth off of 3 different gears. Anyways iv got the motor put back together and put back on the frame and I keep having problems with the one way bearing on the starter Idle gear locking up and causing the starter to spin with the motor. Now I am able to pull the rotor/flywheel off and then I have to pry the one way bearing off of the idle gear after this happens. But I am able to reset the bearing and put the starter gear on and I then put the keyway on it then I slide the rotor with the one way bearing bolted to it on as far as I can and I lock down the rotor by holding it and tightening it down. At this point all is great I'm able to rotate the crank by hand counter clockwise and the starter and idle gear are free like it's supposed to be and if I reach back behind the rotor and spin the idle gear counter clockwise it engages and spins the crank like it's supposed to. But after hitting it with the starter a couple times it locks up again. I'm pulling my hair out with this damn thing. Before I split the case to fix the transmission it didn't have any starter related issues. Also the starter Idle gear hub where the one way bearing rides doesn't look bad or anything same as the bearing it looks fine as well. Any ideas before I have to order a new bearing and idle gear? Oh also if I put it together and only use the pull rope of course it doesn't lock up, only does it after a few times of the starter being used.
    • By Leski991
      Hello,
      I have read many forum topics on this matter but have never found a similar problem. So i bought a cheap as* quad thats got all sorts of parts on it. It's a 1997(if you look the date on frame) Kawasaki KLF(Bayou) 300 EUROPEAN Model (atleast I think, since I'm from Europe), the engine is 1988 if I'm not mistaken and the CDI is 1995.-2006. ( 21119-1447, 6pin ). My problem is that I don't have spark. I would diagnose the issue but connectors from CDI to wiring harness have almost all different colors and I'm not sure if they are connected correctly (pictures below). Pickup coil is putting out around 400 ohms and is pulsing. CDI is being fed 12v by one y/r wire that is coming to connector and with 12v to one gray wire which is coming from ignition switch ( quad actually doesn't have ignition switch so I'm not sure if gray should be supplying power or not). Stator looks good cause when crancking all three yellow wires put out around 5v AC. Neutral light is also on which means the switch should be ok, if it even matters. I know it's not the ignition coil since I get no power nor any kind of pulsing to G/W wire that is coming to it ( and I even put another one on there just to check an it ended with the same result). I'm nowhere near proffesional around this type of stuff so any help would be amazing.




    • By Freedomflyer
      Had the privilege to get out both days this weekend,  weather was fantastic. Was able to take my oldest brother out to an area he hadn't been to yet, and was thankful that we got to spend that time together just the two of us. I did ask some others to go but they were unable to make it so it ended up making a special day for us. His health is not the greatest so will definitely treasure the time and memories of this outing.  Was also able to finally link up with my neighbor and some friends of theirs and take them on one of our favorite trails today. They seem to be gone most weekends over the summer so has been tough to connect over the past 4 years since they bought their Razors. They seem to stick pretty close and go riding and camping together most weekends.  With fall setting in and it dipping into the high 20's and low low 30's at night, our camping season is coming to a close. Still in the 50's - 70's during the day but pretty chilly at night. They had a free weekend so we were finally able to take advantage and get out. Today confirmed for me, once again, why we haven't moved to the sidexside realm yet.  We were going to ride on one trail, and even though they have 50" machines. The trailheads have huge rocks, posts, or  arched cattle guard type gated areas that are exactly 50" apart.  This keeps the larger sized SxS's, jeeps and other 4 wheel drive vehicles off the trails and from getting torn to shreds. My wife and I drove our ATV'S through and friends attempted to do the same.  Even though the posts were 50" apart and perfectly plumb, the ground was sloped side to side  causing the fenders and door area to lean too far to the side and would have scratched the entire side of the machine as he drove through. He couldn't even get the front fender flair through with out it getting scraped and gouged by the wire of the fence wrapped around the posts. So had to change plans and go different route. Still ended up being a terrific day and they had a great time riding in a new area. No SxS for us in the near future!!! Here's some pics from  both days




















    • eManualOnline
    • By jjb012777
      OK I took my starter solenoid apart to clean it as I was hot wiring it with a screw driver for ever and then last time it burned up my ecu I think I heard it's called anyways u don't need that part I read but I looked forever for it to replace it they discontinued it so I got a new solenoid as my was toast and now I need help hooking it up with all my wires I also have a wench so adds a few more and I'm clueless thanks for helping this Montana women out. And please help her out thank u.  Here is a Pic of my solenoid tkx again 

  • Gallery Images

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...