-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By hporter1208
Okay, so I have a 2002 Rubicon 500…bought it last year and it sat for several months until I put a new rear axle in, FINALLY got that done and was super excited to finally have my wheeler going, just to notice a strong gas odor. Popped the seat off and sure enough, pouring gas from the carb overflow. Fast forward a few more weeks and get the new carb and get it in, no leak! Yay. Except now I have no spark. 😒 I’ve tried another plug and checked and am getting no power to the coil pack. I’ve read and read and mostly what I’ve found is ECU, which is fine…but I like to exhaust all avenues before buying the more expensive parts just because I don’t wanna spend the money and it have ended up being something simple that I overlooked because I was trying to rush. 😂 I don’t know if it’s relevant, but I read on another post that someone had similar issues with theirs and it was the sensor on the side of the carb, just a thought since this literally happened after I put the new carb on. It also displays “- -“ on the display screen where it should show the gear position.
-
By Atvguy0901
Thank for the add on quad crazy. I am new here and need some help with my atv. It’s a older Yamaha Timberwolf 250 that I purchased second hand from an person. I got it home ans started to look into it. He stated it needed a cdi box so I ordered one for it and a battery as well also a key switch cause it did not come with one. I put all the parts on it and when I hit the start button it just clicks and noting else. Thank you any help is appreciated.
-
By Yourmanyoshi
I have a kawasaki klf 300b 1987 and when i got it originally from a friend it was sitting for like 10 years and of course it didn't run so i went through the steps of fixing it. Had good compression and clean carb but i wasnt getting any spark. I went through the steps of fixing that and turns out the cdi box was bad, so i replaced that and got spark so i started her up and she was a little scared at first but slowly broke in and idled perfectly fine. But everytime i gave it any gas it would just bog out completely so i had it idling and sprayed starter fluid into the intake to see if it would rev up, but it did the opposite and died out. I think it might be something to do with the spark since after that i took it out and it was wet. Im guessing its not sparking at higher rpms but i have no idea how to fix that since ive never had that issue before, keep in mind ive cleaned the carb maybe 5 different times with a supersonic cleaner and put needles through all the wholes. Someone please help me out with this old *** atv
-
By Hoyt1500
Has anyone used the Boyesen Power Reeds on their LT80? Did they provide more power? Are they worth the money?
-
By germs
I have a 2008 250 bayou I got cheap. Real cheap. The guy said I just needed to remove and replace a couple stator rotor bolts that broke off when he was fixing it, not the case. I think he put it back together wrong and drove it. I'm new to this so not sure what all the parts are called or really even how or what has to be fixed. Any help would be greatly appreciated.
-
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.