Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.

IGNITION PROBLEM MASSIMO 500 2015


bunchy
 Share

Recommended Posts

Hello everyone. I have a 2015 Massimo 500 Gator side by side EFI  I have no fire going to injector, before problem started I replaced injector at that time if I turned engine over the injector would spray fuel, it will not now. On this vehicle I have replaced coil, coil wire, fuel pump spark plug and relay checked fuses and did a visual inspection of wiring finding no problems. 

Will appreciate any help or tips in locating problem

Have a Great Day

bunchy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By sheba2012
      Replaced pump and sock along with the filter still only 15 lbs of fuel pressure any ideas?
    • By geezer99
      Well, I bought the Axis 500 sold at Lowes for $8999 a couple days ago.  This post will be about my impressions as I use, fix, and abuse the machine.  I will add to the post as I gain experience with it.
      Thanks to other posters on this site warning of new machines with loose hardware, one of my first actions was to crawl all over it checking fluids and connections.  Zirks were all freshly greased, fluids in engine, and gear boxes were up to level.  One of the little gas struts that help lift the bed to dump was dangling with only one end connected, and the other strut had not been fully tightened.
      Here are some things I don't like:
      The rear gearbox does not have a differential in it.  It is essentially a solid axle.  Tight turns on lawn will leave tracks, and turns are not as tight on pavement.  In my case this won't matter much, but if you plan to use it on a lawn, this will create tracks on turns.
      To check engine oil you need to remove both front seats and a plastic cover.  This according to the manual.  I'm pretty sure it can be checked with that stuff in place, either from under or above, but that remains to be seen.
      I am not used to a CVT transmission.  I am used to a clutch and multiple gears.  This one requires giving it plenty of gas out of the hole and then backing off to get it to shift up.  I'm sure I will get used to it, but I'd like to be able to take off quietly if I want to.
      The doors have bungie cords to act as springs to close them.  I removed the driver door so I would not need to fight the constant pressure to close.  Problem solved.  I will leave the passenger door as is.  Gotta keep the grandkids safe.
      The status display is hard to read if the sun is on it.
       
      Here is some stuff I like: 
      I was concerned about there being enough torque to slowly climb a steep hill.  There is.  I will elaborate more on this when I've had it on my steeper trails.
      The display has dedicated lights to indicate status of gear position, low oil pressure, over temp, and a bunch of other stuff.  This helps a beginner with feedback that an action taken was successful.
      The sparsity of knobs on the tires dig in well on most surfaces.  I bet they wear out fast on pavement.
      The tilt bed has a tail gate that is easy to operate.  Much like early Japan pickups.
      Steering is responsive and little slack.  Remains to be seen how long to get loose since the u-joints are operating at quite sharp angles.
      Seats are pretty nice.  Will be interesting to see how long it will take me to poke a screw driver though them.
      Seat belts are included to hold grand kids in.  Won't go over 5 mph if both aren't buckled.  Yeah, it works to buckle them empty.  Doing this leaves the belt high on back, so you don't have to sit on it. 
      Hauling it home, my trailer wheel wells were too close together to clear the tires of the UTV.  This required driving it off center a bit, with one set of tires inside the wells and one side driving over the wheel well.  Creeping over the one well required climbing a 10 inch vertical well.  The ability to lock the front axle differential kept both front wheels pulling as I drove the one side up and over the wheel well.  The guys at Lowes were impressed.  They won't touch any but an unobstructed flat trailer loading.
       
      As I gain more experience I will add to this topic,
      tom
       
       
       
       
    • By DonB
      Fuel Injected, 2015 AC XR550XT ATV (renamed the Alterra from 2016 on).  1300 miles.
      I had written an earlier post concerning part of the problem, but a new one has arisen...
      2 PROBLEMS:
      Engine sputters & fails when throttle applied (even from idle and while in Neutral), and, now... Fuel pressure reads @ "0" despite clear line and operational fuel pump. Unit originally suffered fire in muffler - presumably due to engine driveability problem & resulting unburnt fuel... fuel pump ultimately died when starting repairs.   Installed a new fuel pump as dealer advised it was the problem. Have now been chasing a proper fix for several months, as, while it generally starts fine, the engine will not take any sort of throttle - even from idle. Instead, it immediately starts to miss, backfire & die.   From the beginning, the dealer claimed that a new genuine AC fuel pump was all that was needed. However, the replacement, non-AC fuel pump runs at 42 psi & works fine). NEW ISSUE:  Unexpectedly, the first replacement pump stopped registering any fuel pressure (per in-line pressure gauge). This despite confirming both: (a) pump clearly pumping & (b) fuel line - all the way to the fuel injector - clear & delivering fuel. Tried a 2nd replacement pump which, initially, registered pressure (engine performance issues remained). But, when I tried to start it today, no fuel pressure again (and, therefore, apparently no fuel to injector). Again confirmed pump working and fuel line to injector clear & delivering fuel. Engine continues to start easily with starter fluid but, of course, stalls once fluid has burned off. While cleaning/replacing the fuel injector seems the next logical step, it strikes me that, were the injector plugged, I should still be seeing a psi reading on the installed, in-line gauge I've been using (not zero)!
      Any ideas before I surrender this to the dealer and a B-I-G bill?
      thanx, db
    • By Malaka
      Need new tires for mostly plowing and running around. Found some good tires. 
      specs call for front  26-8-12 Rear 26-11-12
      Has anyone put 27-9-12 & 27-11-12 as more of selections going up on front and taller 
       
      thanks all
       
    • By UHNW-ATV-BOAT-TOYS-CAMPS
      Private locations to ride for families. 
       
      send a message for details. 
  • Gallery Images

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...