-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By GTX-Racer
I am looking for a PDF version of a manual for a Suzuki Quadrunner 250. I am not sure of the year, but believe it is a late 1990s model.
-
By GTX-Racer
I recently purchased a 1998 Suzuki Quadrunner 160. It is very clean and in good condition for it's age. I am rebuilding the carburetor and looking to do some maintenance.
I am going to change the oil, which is simple enough, but after reading the manual there are many adjustments that are needed when the oil is drained. Does anyone have any advice on the valve clearance or clutch adjustments? Both require the oil to be drained and the engine at top-dead-center. Anything else that I should do while it is in this configuration?
-
By GTX-Racer
I am looking for a front battery cover for a Suzuki Quadrunner 250 (year unknown). It has the headlight on the handle bars and no speedometer.
-
By 97kingquad
Okay so I bought this 1997 sazuki king quad from a guy and he had it for a few years.
He had it registered and on the trails last year but he said it bogged and backfired when he would try to drive it. so it sat for a year.
I bought it for 800 bucks and got it running that night and it ran great for a few days
But I parked it the other night and went to start it again and it was really hard to fire up and when I did it was bogging and idling high then low again.
So I took the carb out and cleaned it (ended up doing it twice because it was still doing the same thing)
Now today I have it running slightly better, but it is still like 20%
I have been looking it up and trying to figure it out but I can't find the issue, has anyone else had this problem? I'll attach a video of it running and giving some throttle
-
By Banshee898
2014 Honda Rancher TRX420TM1: Unit starts right up, once it warms up it stalls and more difficult to start but once it does start it won't stay running. I have replaced the fuel assembly, IACV, O2 sensor and fuel injector. There are no active DTC codes. Disconnecting fuel line at injector and turning on key there is a steady stream of fuel. Plug looks good did not see crack in ceramic. Is there any way to test the ignition coil?
Thanks for any help.
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.