Quantcast
Jump to content

Recommended Posts

Posted

I just found this online and thought it looked pretty cool. It's some off brand by Well Motor.

Hunter 650 4WD Buggy Web I_Logic

Hunter%20650cc%20FR.jpg

Hunter%20650cc%20FL.jpg

Hunter%20650cc%20front.jpg

Hunter%20650cc%20rear.jpg

650cc%20Buggy%2005.jpg

Engine Type 4-Strokes, Water Cooled, Fully-Automatic

Cylinder Arrangement Double Cylinder

Transmission System Reverse N1230 Shaft Drive 4WD

Bore x Stroke (mm) 57x57.8

Piston Displacement (cc) 147.4

Compression Ratio 8.4:1

Maximum Power (kw/r/min) 14kw 4500r min

Maximum Torque (N.m./rpm) 14/kw/4500r

Starter System Electric/ Kick

Lubrication Forced pressure(wet sump)

Transmission Shaft Drive

Overall LxWxH (in) 88x50x44 inch

Wheel Base (in) 60

Seat Hight (in) 44

Min. Turning Radius (mm) 2800

Ground Clearance (in) 4

Rider Capacity 2 Person

Dry Weight (lb) 275

Brake (Front/Rear) Drum/Disc

Tyre, Front 25x10x12

Tyre, Rear 25x10x12

Ignition Type C.D.I

Fuel Tank Capacity (L) 12L

Engine Oil Capacity (L) 1L

Gear Oil Capacity (L)  

Front Suspension Independent,Telescopic Arm

Rear Suspension Swing Arm

Parking Brake Mechanical Lock

Max. Load Capacity (lb) 210

Max. Speed (mi/hr) 45

battery 12V-9A

PACKING SIZE (in) 226x132x117 cm /G.W. 435 KGS NW: 410KGS

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Eisenmatt17803
      Good Morning!
      Has anyone had a problem with the small aluminum 90 degree elbow popping out of the valve cover and blowing oil all over the place? It looks like it is simply pressed in and will most certainly repeat the offense. Any experience you all can share with this issue?
      Thanks in advance.
    • By kevinohio
      My cylinder is full of gas.i thought if carb was messed up.gas came out the overflow.had a cheap china made carburator on it.i ordered a factory used one.couldnt find a new one.also the fuel shut off isn't working right.and going to be needing the battery hold down and seat bracket.where can I get a used one?
    • By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
    • By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • By roggers
      Hi everyone,
       I often work on both ATVs and larger construction equipment, and I’m always on the hunt for solid OEM manuals—service, repair, and parts. The usual searches give a lot of random PDFs or unofficial scans that aren’t very trustworthy.
      What online sources do you all use when you need a factory manual quickly? Are there sites you’ve found that consistently provide genuine OEM content for ATVs or heavy machinery?
      I recently came across Heavy Equipment Manual, which claims to provide verified OEM service and parts manuals (covering brands like Caterpillar, Komatsu, Kubota, etc.). Has anyone here tried it, or do you have other go-to resources you’d recommend?
      I’m interested in options that are:
      ·        Fast to download
      ·        Cover both heavy equipment and ATV models
      ·        Clear on licensing and safety
      Thanks for sharing your experiences and any recommendations!
×
×
  • Create New...