Quantcast
Jump to content

Recommended Posts

Posted

Time once again to review the winners of the Annual "Stella Awards." The Stella Awards are named after 81 year-old Stella Liebeck who spilled hot coffee on herself and successfully sued McDonald's (in NM). That case inspired the Stella Awards for the most frivolous, ridiculous, successful lawsuits in the United States

Here are this year's winners:

5th Place (tie):

Kathleen Robertson of Austin, Texas, was awarded $80,000. by a jury of her peers after breaking her ankle tripping over a toddler who was running inside a furniture store. The owners of the store were understandably surprised at the verdict, considering the misbehaving little toddler was Ms. Robertson's son.

5th Place (tie):

19-year-old Carl Truman of Los Angeles won $74,000 and medical expenses when his neighbor ran over his hand with a Honda Accord. Mr. Truman apparently didn't notice there was someone at the wheel of the car when he was trying to steal his neighbor's hubcaps.

5th Place (tie):

Terrence Dickson of Bristol, Pennsylvania, was leaving a house he had just finished robbing by way of the garage. He was not able to get the garage door to go up since the automatic door opener was malfunctioning. He couldn't re-enter the house because the door connecting the house and garage locked when he pulled it shut. The family was on vacation, and Mr. Dickson found himself locked in the garage for eight days. He subsisted on a case of Pepsi he found, and a large bag of dry dog food. He sued the homeowner's insurance claiming the situation caused him undue mental anguish. The jury agreed, to the tune of $500,000. In my opinion this is so outrageous that it should have been 2nd Place!

4th Place:

Jerry Williams of Little Rock, Arkansas, was awarded $14,500. and medical expenses after being bitten on the buttocks by his next door neighbor's beagle. The beagle was on a chain in its owner's fenced yard. The award was less than sought because the jury felt the dog might have been just a little provoked at the time by Mr. Williams who had climbed over the fence into the yard and was shooting it repeatedly with a pellet gun.

3rd Place:

A Philadelphia restaurant was ordered to pay Amber Carson of Lancaster, Pennsylvania, $113,500. after she slipped on a soft drink and broke her coccyx (tailbone). The beverage was on the floor because Ms. Carson had thrown it at her boyfriend 30 seconds earlier during an argument.

2ndPlace:

Kara Walton of Claymont, Delaware, successfully sued the owner of a night club in a neighboring city when she fell from the bathroom window to the floor and knocked out her two front teeth. This occurred while Ms. Walton was trying to sneak through the window in the ladies room to avoid paying the $3.50 cover charge . She was awarded $12,000 and dental expenses

1st Place:

This year's runaway winner was Mrs. Merv Grazinski of Oklahoma City, Oklahoma. Mrs. Grazinski purchased a brand new 32-foot Winnebago motor home. On her first trip home, (from an OU football game), having driven onto the freeway, she set the cruise control at 70 mph and calmly left the driver's seat to go into the back & make herself a sandwich. Not surprisingly, the RV left the freeway, crashed and overturned. Mrs.Grazinski sued Winnebago for not advising her in the owner's manual that she couldn't actually do this. The jury awarded her $1,750,000. plus a new motor home. The company actually changed their manuals on the basis of this suit, just in case there were any other complete morons around.

Guest Fox300exchic
Posted

I remember that Mc Donalds thing from my street law class in high school. Its amazing how these people get money from these law suits but the people that really need the money in serious law suits dont get it half the time.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By joezee13
      After turning off engine in neutral  starter wont engage If I rock unit back and forth it engages Getting progressive worse.
    • By middlebrookgt
      Hi All.  I introduced myself some weeks ago with my 2006 LT-F400F that needed a list of repairs including replacing the cracked generator cover.  It is back together as of last night and cranks up, idles and revs high pretty well.  Needs some fine tuning and stop backfiring at stop.
      The big issue is it will not go into gear.  I reassembled the insides with help from y’all’s posts.  The transfer selector moves from H-L-R, and the foot shifter moves thru the gears and finds neutral easily enough.  Before I tear it back open, the  transfer selector on top does not move as far as the repair manual says.  The diagram shows the shaft moving something like 40 degrees between L and H and 50+ degrees between L and R but it doesn’t move that far even though it finds the indent areas and moves well.  
      Could this be the problem.  I aligned all the dots on the shifter gears inside and it appeared to not be binding anywhere.  I do hear the gears touching when I shift like they are trying to engage, but zero movement from the ARV
      It was somewhat difficult to tell whether all the parts are installed on each shaft.
      Are there better/bigger photos somewhere that would allow me to be confident I included all the washers and bushings, etc?  If I had any doubt on parts that were laying inside after the cover broke then I purchased replacements from online stores.
      TIA for any input or feedback!!  Pics are from when I first took the generator cover off.


    • By Ejwill
      I rebuilt the top end on my 2007 Honda Trx500fe. It ran fine right after the rebuilt. But now when I try to crank it it blows Bach through the carburetor. I held my hand over the opening for the intake air and it blew gas back on my hand. Can figure out what happened all of a sudden. It was cranking and was able to ride it running through all the gears. Now can get it to crank just blowing gas back to the air filter. Need help again. Starting to think I should have walked away from this one.
    • By mywifeknowseverythin
      For those of you who are into coffee, I found this little article that might interest some of you.

      I admit it. I am a coffee snob. I try not to be obnoxious about it, but let the record show: I enjoy a really great cup of coffee. But pay $4 a cup for it? No way. Even snobs have their limits.
      Over the years, I’ve learned that a really good cup of coffee has less to do with money and more to do with knowledge and care. In fact—and this is the amazing thing—the more I learn, the less I spend.
      BEANS. Purchase whole bean coffee as soon after it has been roasted as possible. Freshness is the key to a superb cup of coffee. Purchase in small amounts—only as much as you can use within 2 weeks of being roasted.
      RATIO. The perfect ratio of coffee beans (prior to grinding) and water is: One-half cup whole beans to 8 cups of water.
      GRIND. Grind your beans as close to brew time as possible. A burr or mill grinder that crushes the beans is preferable to a blade grinder that cuts them. Once ground, coffee should be used immediately.
      WATER. If your water is highly chlorinated use bottled or filtered water. It must be right at 200 F, just short of boiling temperature, when it hits the dry grinds. This is critical to creating a great cup of coffee. Consume immediately.
      STORE. The enemies of roasted coffee beans are air, moisture, heat and light—in that order. Keep your beans in an airtight container that is not close to moisture (sink, dishwasher), heat (oven, stove) or light (countertop). Do not store your daily coffee in the refrigerator or freezer because contact with moisture causes it to deteriorate. For larger quantities of roasted beans that you cannot use within 2 weeks, wrap in airtight bags and store for up to a month in the freezer—making sure the beans are completely protected against moisture. Once removed from the freezer, do not return.
      BUY. Most supermarkets offer high-quality, roasted coffee beans for $.60 to $1 per ounce ($9.50 - $16.00 per pound). Ouch! Discount warehouse clubs like Costco, Sam’s and B.J.’s have considerably less expensive coffee at about $9 a pound for name brands like Starbuck’s and Peet’s. Still, that’s too rich for my blood.
      ROAST. I roast my own coffee for two reasons: It is infinitely better tasting and half the price. I purchase green coffee beans by mail order for about $4 - $6 a pound, depending on current conditions and variety. I started out roasting in a popcorn popper (West Bend’s Poppery II is ideal) and have graduated to a small coffee roaster. My favorite resource for everything from roasting instructions to green coffee beans is http://www.u-roast-em.com/. Owner Jim Cameron has a wealth of knowledge and is anxious to share.
      You won’t believe how easy it is to roast coffee. And enjoyable, too. I roast only one-week’s worth at a time—about twenty minutes. Green coffee beans have an indefinite, useful shelf life of at least a year, and probably two or longer. But I’ll never know. Coffee beans just don’t last that long around my house!
    • By Need-help-with-quads
      So I picked up a 1995 Yamaha warrior a while ago and it ran decent with quite a bit of power, I was able to wheelie like nobody’s business, but I noticed that the air filter box lid had bunch of holes drilled in the top and hole in the side, also the air filter itself was serving no function and there was a huge rip in it. So I got a new air box and new filter and when I installed it, the quad lost all power and acted like it was cutting out for split seconds at full throttle. For reference I think it was running rich before because it would backfire a lot so I think it’s just restricting air flow, but how would I adjust to that because I tried leaning out the carb as much as I could but it didn’t seem to do anything unless I put the other airbox lid on with the drilled holes.
      any help would be much appreciated
      Also even when I put the old lid on, it seemed like just the new air filter gave it enough restriction that it still wouldnt run right
×
×
  • Create New...