By
Guest Fox300exchic
in General ATV Discussion
-
Similar Forum Topics
-
By Thumpinhard25
First thanks for any help guys, new to the forums and it's gotten me this far. I bought a 2001 bear tracker 250 for my family to get around the dirt bikes races. It wasn't running right and had a high idle. Previous owner thought it was a carb problem, so he ordered a new Zoom carb and new intake boot, but it still had the same high idle. ( I believe he had the throttle cable adjusted wrong, because it idled fine when I put it back together) So I tore down and cleaned the stock carb, and it started up and idled fine, but needed to have the choke 1/2 out to run. I swapped to the new zoom carb and had the same issue. Choke half out bike ran ok. I played with the needle and the pilot screw with no change. ( bike did seem to be running rich though, but didn't get better when I tightened pilot screw or raised meddle) I Took it to the races and once I started bouncing around in the cattle fields the quad started cutting out real bad. It would barely run. Sometimes it would run with choke off, sometimes choke 1/2, sometime choke full. I cleaned carb again, checked float level, and boots, no change still wouldn't run. Then suddenly it started running ok again. This makes me believe it's an electrical issue rather then carb. I know there's no air leak, it's been checked, both carbs are clean( I've swapped them out a couple times, it starts up immediately and usually idles fine. But then bogs down/ or stutters under throttle. I saw the post on the guy who disconnected his rectifier and reconnected and suddenly it started working again, which lead me to believe it may be electrical and not carb. So any advice on what I should check? Any way to test the CDI or rectifier? Once again, I appreciate your help.
-
By Mikey69
Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
-
-
By ATVNetwork
As the 2025 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, got underway with back-to-back Florida AMA Pro only events, it was evident that Phoenix Racing Yamaha’s Joel Hetrick picked up where he left off last season.View the full article
-
-
By quadcrazy
Key Features of Seal Skin ATV and UTV Covers
Custom Fit: The covers are designed to provide a snug fit, ensuring that every inch of your vehicle is protected. This custom fit also prevents the cover from flapping in the wind, which could cause damage to the paint. Durable Materials: Seal Skin uses high-quality materials like heavy-duty polyester and waterproof coatings to ensure long-lasting protection. All-Weather Protection: Whether it’s scorching heat, torrential rain, or freezing snow, these covers are built to withstand all weather conditions. Easy Installation and Removal: The lightweight design and elastic hems make it easy to put on and take off the covers. Breathable Fabric: Prevents condensation buildup underneath the cover, which can lead to mold and mildew. Affordable Pricing: Seal Skin offers competitive pricing without compromising on quality, making it an excellent choice for budget-conscious buyers. ATV Covers: Perfect for Every Model
Seal Skin’s ATV covers are available in various sizes and designs, ensuring a perfect fit for your vehicle. These covers are ideal for protecting four-wheelers, whether you’re storing them for a season or simply keeping them safe between rides. The covers are lightweight yet durable, making them a practical choice for any ATV owner.
Visit the Seal Skin ATV Covers page to explore the full range.
UTV Covers: Tailored for Utility and Comfort
UTVs are larger and often used for both work and recreation, so they require a cover that can handle their size and unique features. Seal Skin’s UTV covers are designed with these needs in mind, providing superior protection while ensuring a precise fit. These covers are perfect for two-seater and multi-passenger UTVs alike.
Explore the Seal Skin UTV Covers collection here.
How to Choose the Right Cover
Size and Fit: Measure your vehicle to ensure you select the correct size. A well-fitted cover provides better protection. Usage Environment: If you store your vehicle outdoors, opt for a cover with maximum weather resistance. Material Quality: Look for covers made from durable, waterproof, and UV-resistant materials. Features: Consider additional features like reinforced seams, secure straps, and breathable fabric. Customer Satisfaction and Warranty
Seal Skin Covers is known for its excellent customer service and commitment to quality. They offer a warranty on their covers, ensuring that your investment is protected. Additionally, their user-friendly website and helpful customer support team make it easy to find the right cover for your needs.
Conclusion
Protecting your ATV or UTV with a high-quality cover is one of the best ways to ensure its longevity and performance. Seal Skin Covers offers reliable, durable, and affordable options that cater to a wide range of needs. Whether you own a compact ATV or a large UTV, you can find the perfect cover on their website.
Don’t wait until it’s too late—explore the full range of ATV and UTV covers today at Seal Skin Covers. Your vehicle deserves the best protection, and Seal Skin delivers exactly that.
View full post
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.