-
Similar Forum Topics
-
By lindzjo
Does anyone have a service manual for Qlink 700 atv.I cant find anything on one.Please help
-
By QuadDad22
Picked up a 86’ LT 185 for $10 in trade value(my items only cost me $10)
recoil only , I pull the recoil and it won’t move , so I took it off , I can spin the crank there one full turn left then it locks up , and one full turn back to the right and it locks up
pulled the plug , the piston is moving up n down , both valves are moving(pulled the caps)
pulled the clutch off , oil pump gear , and it still locks up after one turn
any ideas or where to go from here would be greatly appreciated
im a 2 stroke guy so this all is new to me
thank you in advance y’all
-
By StayTheTrail
Hey everyone!
Ya'll have been so great and welcoming to our new Ambassador program, we wanted to be sure that Quad Crazy was getting info directly from us about the Stay The Trail educational program too.
The program was started in 2003 with the purpose of educating the public about responsible trail use and fostering a sense of stewardship among OHV enthusiasts.
The "Where To Go" section of our website is another great resource for anyone looking for trail info. We host all of the Motor Vehicle Use Maps (MVUM) and overlay them on the Google mapping system. We want this site to be the place you go to for trail maps as you plan a run. The MVUM maps show what trails are open for what types of vehicles. If a trail is not on these maps, it is not an open trail.
We attend events and set up at trailheads throughout the season to ensure that folks are getting the info and education they need to be responsible on public trails. We have posters and brochures that quickly review these guidelines (all of the Etiquette info can also be found on the website).
Very soon, we will have a HUGE announcement about mobile mapping options!
Sam and Matt are going to be around on the forum, keeping everyone updated on what is new with the program and answering questions. Feel free to ask us any questions!
Oh – and don’t forget to follow us on FACEBOOK!
-
By Makj44
Hello I have a 1999 Honda 300 4w/drive and I just replaced the Oem carburetor with a aftermarket carburetor after installing the carb on the bike it started great and idled like new one but when I shifted into first gear and tried to move forward it died, I shifted back In neutral and the wheeler started easy again I let it set there to see if maybe it needed to warm up but when I shifted into first and tried accelerating it died again, I am not a use to working on it and would appreciate any advise thanks
-
-
By Robin442
Hello all! New to the site, I came here seeking answers as I've decided to help my cousin get his once good running buyou 220 going again.
I've owned an 82 kawasaki kz1100 and have done lots of work to it over 20 years of ownership.
Looks like the wire diagram colors are same or similar to my bikes wiring, a definite plus
Cousin was riding through fairly high weeds and brush after it's rained, when it just died. It would turn over but no fire.
This to me sounds like perhaps a CDI issue or a fried coil, idk that why I'm asking you gurus LOL
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.