Quantcast
Jump to content

Recommended Posts

  • Admin changed the title to PLEASE HELP - Need service manual for Qlink 700 ATV
  • 1 year later...
Posted

I need one also, have a Qlink rodeo 700 efi, I'm not 100% on the year but I know they made them until 2013 and am pretty sure they didnt change. I understand there are some differences in the carb and efi models, specifically the top end (cylinder head, 2v for the carb and 5v for the efi) as well as wiring and electrical differences. So I need to make sure manual covers efi models. Please, any help greatly appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Forum Topics

    • By Hagbard
      Picked up a barn find that someone had already partially disassembled because the “motor locked up” but they never opened the case. Everything was bagged and labeled, and as I’ve mentioned before- I love a challenge ¯\_(ツ)_/¯ 
       
       




      After a couple hours of fun with various pullers and hammers I managed to persuade the magneto/flywheel to come off. Hoo boy what a mess. Then I found an actual rats nest in the clutch cover. ಠ_ಠ 



    • By Bobbles
      Hopefully someone can help me out, I purchased a 350 moto4 2wd while I'm trying to fix a dying honda. I can't see the vin number as there was damage and a bar has been welded where I think the vin should be, The decals say 350 moto4 Huntaway, it has the square gear change low, high, reverse up on the left of the handlebars and it has three rectangle lights up on the dash. after googling I'm struggling to find anything called huntaway, Any ideas? Thanks.
    • By Jameya
      You guys are my last resort. Got a 2000 prairie 300. Brand new battery, neutral switch, aftermarket carb, spark plug, silenoid, key switch. Fuses are good. No neutral green light, will crank if cross the silenoid, but won’t start. No power at the ignition switch or regulator. I’m thinking cdi box or starter relay. Anyone have any suggestions?
    • By Noti95
      20241020_164625.mp4    
      Hi everyone i am coming from Europe and looking forward to join this community. I'm currently riding Kymco mxu300r which is the same bike as Brute Force 300 just different plastics.
      Recently i came to a problem with this atv when accelerating near full throttle it suddenly lost power like i quickly released throttle but i kept throttle lever in the same spot. Since then it pulls off fine until you are past first 1/4 of throttle and then starts stuttering/misfiring. Same behavior when revving in neutral or riding. Cleaned and gapped spark plug but no better.
      Could this sudden symptoms be from bad ignition coil and cdi or dirty carb? Carb was never cleaned before but i used stabil in gas when atv was not in use. Atv has 1000 miles carb on it is Keihin cvk32.
      Sorry for longer post and thank you in advance.
    • By flyinbrian365
      The files it too large to upload so here's a link to my dropbox.
      https://www.dropbox.com/s/boeo3kewqeuj7td/2016-20 SXS Pioneer 1000M3-M3P-M3LE-M5P-M5D-M5LE service manual.pdf?dl=0
      https://www.dropbox.com/s/z6kjj2to6yyneip/2015 SXS 500M2 Pionneer service manual.pdf?dl=0
       
      Hope this helps someone!!
       
×
×
  • Create New...