Quantcast
Jump to content

"Runva Winch" Anyone ever heard of them?

PolarisRich

By PolarisRich
in General ATV Discussion

 Share

Recommended Posts

PolarisRich Community Regular

PolarisRich

Posted
Posted

I know this is a little after the fact, but I just ordered a "Runva Winch 2.5P 2500 lb ATV Winch Super Deluxe Package" and I was wondering if anyone has ever used one!

I know Runva has been big in the Jeep mudding circuit for a while now. They now seem to be aiming there sights at the ATV and UTV worlds. This is my first winch and winch install. I know it's not a hard job, but any info or tricks would be greatly appreciated. I'll be installing it on a 2005 Polaris Sportsman 500. I just bought a original Pure Polaris Mounting Plate and Fairlead bracket, the only problem is that it did not come with any bolts.

So lets hear your opinions!!!!!

[ATTACH]956[/ATTACH]

[ATTACH]957[/ATTACH]

1.jpg.3cdb97737cfb2da8b9a5454fb717aa37.jpg

4.jpg.58271630946a74b28f76d0ad219dfd35.jpg

PolarisRich Community Regular

PolarisRich

Posted
  • Author
Posted

I got my winch in the other day and it's all installed. Nice and clean looking install and the winch sounds nice, now I just need to get out riding so i can try it out. I think the hardest ting about the install was having to cut the front cover of the bike to let the fairlead stick out.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • toe420
      Anyone from BC?
      By toe420
      Anyone here from BC? Where do you ride? 
    • rjsummer
      Anyone have a Suzuki LT185 owner manual?
      By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • HoldenBoy
      Starter not staying engaged while cranking
      By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • crankin
      Starter circuit cut out relay 1997 Yamaha Big Bear 350 4x4
      By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?
    • Zrach
      Faulty CDI Workaround / "Park-Circuit" Fix: 2009 Suzuki LT-A400 (KingQuad)
      By Zrach
      I wanted to share a successful workaround for a "no-spark" issue on a 2009 LT-A400.
      This is specifically for cases where the CDI has been diagnosed as faulty, but the age or condition of the machine makes the cost of a brand-new OEM unit hard to justify.
      Note: This modification compromises the factory “no-start” circuits.
      On some malfunctioning CDI units the internally damaged circuitry is only partial.
      Feeding full time power to the Parking Brake pin, the unit is triggered to bypass the internal fault and produce a healthy consistent output to the Ignition coil.
      The Modification
      See the second diagram attached below for the wiring specifics.
      The Result:
      The machine has clocked over 1,000km since this repair and is still running strong with no ignition dropouts.
      ⚠️ IMPORTANT SAFETY WARNING ⚠️
      Please be aware that this modification compromises the factory safety "no-start" circuits.
      The machine will now start in gear. The safety interlock involving the handbrake is no longer functional. The machine can move unexpectedly if the starter is pressed while in gear. Proceed at your own risk. If you sell the machine or let others ride it, ensure they are fully aware that these factory safety buffers have been removed.
      Faulty CDI Workaround.pdf

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...