Quantcast
Jump to content


2002 Polaris Sportsman 500 - Smell Of Gas In The Oil


Recommended Posts

Working on a 2002 Polaris Sportmans 500.

Just changed the oil. Rode it for a bit, a couple days

Later I went to ride it, I checked the oil it was a little

over full and could smell gas.

It started right up and runs fine.

I did not shut the gas off but I never have.

What could be wrong?

Thanks,

van

Link to comment
Share on other sites

the needle and seat i think are available only in a carb kit, if you aren't driving it right away, i would change the oil after you think you have found the problem. check your over flow hose too, to see if it's clogged, if you leave the gas on and the over flow is blocked, it will do the same thing as a bad needle and seat.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By mga
      I see quite a few ads for that  Tribotex additive. It's kind of expensive, has anyone used it it their ATV or any other vehicle?
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • By Slitzer
      How often do you change oil in front/rear diffrentials and gearbox?
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
×
×
  • Create New...