Quantcast
Jump to content

rappy97

Members
  • Posts

    422
  • Joined

  • Last visited

Everything posted by rappy97

  1. rappy97

    rappy97

  2. Yeah, it was the reverse sensor. It was cutting ignition at 5500rpm.
  3. Last weekend and yesterday, and tomorrow actually. Last weekend, took first place in the mod class, there were probably 10-15 bikes... Unfortunately no timers. Yesterday was T&T at West Michigan Sand Drags. Ran a 5.11 off the trailer with it having little traction and messed up gearing, ran a 5.0 at 57mph, and it was all down hill from there. It just spun like crazy! Last week- Yesterday, getting zero traction-
  4. Just before I launch, that's the rev limiter. The other noise is from it cutting off and not getting any fuel.
  5. Couldn't get the dumb thing to run half right today. Best was a 5.52, which should be more like a 4.7x. There is no fuel above 6500rpm. Will have to figure that problem out tomorrow. Here's a quick video- [ame=http://www.youtube.com/watch?v=nxWvllljH2k&sns=em]Drag Raptor Phil's 5/18/13 - YouTube[/ame]
  6. Have patience LOL. Going out for a few runs in a little bit, track is getting groomed right now.
  7. Just to clean it up a little bit, it's not practical at all lol. That's part of building a drag bike, trying to hide wires, and just make it look very simple.
  8. Started her up last night... [ame=http://www.youtube.com/watch?v=-bqMO8AKKVA&sns=em]2013 Drag Raptor Start Up - YouTube[/ame]
  9. Dipping is a really fun hobby, used to do quite a bit of it. Your stuff looks good.
  10. Maybe a little:wink:... We will see. First debut is on the 18th, I'll post the helmet can footage.
  11. Thank you! Yes, it's a total money pit lol, could be spending money on worse things I suppose. Yep, it's strictly a racing quad now with the rigid front end, no dunes or trails for me!
  12. Got it together last week. All powder coating was done by myself, with the exception of the swing arm and subframe. Barker built motor, +1 head, Cuervo cam, Sredrum throttle body, CP Tech piston, Troywcc EVAC valve Templeton drag pipes Skat Trak 76 rollout 12 paddle haulers Custom drilled rotor QuadTech foam/cover AM Chassis +6" "T" stem and -8 width +6 forward single arm rigid front end ASV C5 clutch lever Turbo Chassis +4 swing arm Direct Drive CNC 10x2" front wheels W2 (spindle mounts) Sandtoyz Unlimited 18x3 front tires Custom aluminum "bumper" Custom lightweight rear caliper Fly Racing start button ECATV tether Modified lightweight subframe Big thanks to Quality Powdercoat (qpcoat.com) for the subframe powder coating and swing arm coating, Brett (sand2kinc.com) for helping me out with some tips when putting together... And numerous members from other forums for helping me get the parts to build this. It weighed in at 312lbs wet with this 25lb axle, a 12lb aluminum JJ&A axle is enroute.
  13. Yes... It will fit. None of the stuff will work though.
  14. The only way you can tell the size of the engine is to check the size of the cylinder. Good luck.
  15. Very nice! What kind of riding? A powervalve Cheetah, or bigger Serval would be good for play/trail.
  16. Yes, all plastics on them are interchangeable. If it runs good, I would say $1400-1650. Make sure you ride it and MAKE sure there is a 2nd gear, 01s are notorious for having junk transmissions.
  17. ^ this +10000. It's coming. Soon. Guns that are not meant for hunting, recreation, etc... Are for self-defense, which is what the bulk of ARs and AKs are for. People who say you don't need home defense firearms, or plans, are far too reliant on police and government, IMO.
  18. Interesting... I've never saw a 30 round clip on any assault weapon, or even any gun for that fact. Being a prepper, I've always thought an AR or AK was EXCELLENT for protection, perhaps not?
×
×
  • Create New...