Quantcast
Jump to content


Not for the WEAK

mywifeknowseverythin
 Share

Recommended Posts

mywifeknowseverythin Grand Master

mywifeknowseverythin

Posted
Posted

Watch and learn, from their mistakes...

http://my.break.com/media/view.aspx?ContentID=270492

http://www.break.com/index/disgusting_arm_break.html

http://www.break.com/index/skater_hi...on_street.html

http://www.break.com/index/face_firs...ment_wall.html

Not sure if this ones real,

http://my.break.com/media/view.aspx?ContentID=240104

But this one sure is,

http://www.break.com/index/bikefaceslam.html

:confused:

Link to comment
Share on other sites
Guest Fox300exchic

Guest Fox300exchic

Posted
Posted

They have videos like that on a show on MTV called Scarred. Pretty wicked. Bones breaking and coming outta guys arms and stuff.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • mga
      interesting idea......or a bad one?
      By mga
      I just saw a video on TikTok where some guy took the rear end off an ATV and bolted on a roto tiller in place of rear wheels. I wish i saved that video to post here....good thing it was 4 wheel drive...lol but, it seemed to work.
      I'm not sure how he made it bolt on to the drive....
    • Bobbywolf
      1998 Big Bear running lean, real lean.
      By Bobbywolf
      I am working on a basket case for a friend.  It is a 98 Big Bear (YFM350FWB).  It came with a parts machine which is a 96, which I am coming to find out is VERY different from his machine.
       
      Anyway, first thing is first.  I checked compression, 150psi.  Valves are set correctly, and the engine is in time.  I cleaned the carb, and there was some junk in the passages.  It is a chinese carb, which I figured from the lack of markings or lettering altogether.
       
      The bike runs.  It idles ok, but breaks up badly under acceleration.  Pulling a new spark plug shows it is running lean.  White strap, with no black whatsoever.  So I have the carb adjusted with the mixture screw out way too much (about 5 turns), and the diaphragm needle lifted to the top slot.  It is still not getting enough fuel (or too much air).  It backfires through the carb, and cannot get above idle without carrying on.  The carb boot is in good shape, so it isn't pulling any air there.  I did test this as well by spraying ether around the boot when running, looking for intake leaks.
       
      Anything big I am missing here?  I am starting to believe that this chinese carb is the issue.  This quad came with the original carb, which I would like to rebuild and use, but the mixture screw is totally stuck, and stripped way down in its recess.  
       
      Thanks for any assistance.
    • Werewolf
      2007 sportsman 450- one spark only
      By Werewolf
      My wheeler originally had a fuel leak.But on trying to start it no spark. Took front end off, when I try to start it I get one spark then nothing. Come back a while latter one spark,replaced coil and cdi box no help?
    • Gwbarm
      RIP: Tommy Smothers, One of the Great Natural Comedic Talents
      By Gwbarm
      I just heard Tommie Smothers died, I watched his show in the 60s, it was a great show one of the best. He will be missed, if not for Mom liked you best, then definately for YOYO MAN and his state of YO.
    • Best Fit and Protection Guaranteed for all your cars, trucks, boats, jet-skis and more. Visit SealSkinCovers.com. Seal Skin Supreme Covers come with a Lifetime Warranty. Free Shipping!
    • autocustomizer76
      New member looking to learn from those that have been there/done that.
      By autocustomizer76
      Hey all got a Kawasaki 300 that's seen better days I'm looking to get running.  But first, I'm working on a Honda 350 ES and mainly needing where are you all finding quality parts at good prices.  Atvs are really hot items around here right now and most of the folks wanting and needing them are not familiar with working on them.  I'm looking to find a good resource for information and if it works out well pass this group along to the folks I help to get them in the know how to get the most out of their machines.  Thanks in advance.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...